[PATCH v3 0/3] Add 16GT/s equalization and margining settings

[Shashank Babu Chinta Venkata]

Add 16GT/s specific equalization and rx lane margining settings. These
settings are inline with respective PHY settings for 16GT/s 
operation. 

In addition, current QCOM EP and RC drivers do not share common
codebase which would result in code duplication. Hence, adding
common files for code reusability among RC and EP drivers.

v2 -> v3:
- Replaced FIELD_GET/FIELD_PREP macros for bit operations.
- Renamed cmn to common.
- Avoided unnecessary argument validations.
- Addressed review comments from Konrad and Mani.

v1 -> v2:
- Capitilized commit message to be inline with history 
- Dropped stubs from header file.
- Moved Designware specific register offsets and masks to
  pcie-designware.h header file.
- Applied settings based on bus data rate rather than link generation.
- Addressed review comments from Bjorn and Frank.

Shashank Babu Chinta Venkata (3):
  PCI: qcom: Refactor common code
  PCI: qcom: Add equalization settings for 16GT/s
  PCI: qcom: Add rx margining settings for 16GT/s

 drivers/pci/controller/dwc/Kconfig            |   5 +
 drivers/pci/controller/dwc/Makefile           |   1 +
 drivers/pci/controller/dwc/pcie-designware.h  |  30 ++++
 drivers/pci/controller/dwc/pcie-qcom-common.c | 129 ++++++++++++++++++
 drivers/pci/controller/dwc/pcie-qcom-common.h |  14 ++
 drivers/pci/controller/dwc/pcie-qcom-ep.c     |  44 ++----
 drivers/pci/controller/dwc/pcie-qcom.c        |  72 ++--------
 7 files changed, 201 insertions(+), 94 deletions(-)
 create mode 100644 drivers/pci/controller/dwc/pcie-qcom-common.c
 create mode 100644 drivers/pci/controller/dwc/pcie-qcom-common.h

-- 
2.43.2