Re: [PATCH v3 0/3] Add 16GT/s equalization and margining settings

[Niklas Cassel]

On Thu, Apr 18, 2024 at 05:09:33PM -0700, Shashank Babu Chinta Venkata wrote:
> Add 16GT/s specific equalization and rx lane margining settings. These
> settings are inline with respective PHY settings for 16GT/s 
> operation. 
> 
> In addition, current QCOM EP and RC drivers do not share common
> codebase which would result in code duplication. Hence, adding
> common files for code reusability among RC and EP drivers.
> 
> v2 -> v3:
> - Replaced FIELD_GET/FIELD_PREP macros for bit operations.
> - Renamed cmn to common.
> - Avoided unnecessary argument validations.
> - Addressed review comments from Konrad and Mani.
> 
> v1 -> v2:
> - Capitilized commit message to be inline with history 
> - Dropped stubs from header file.
> - Moved Designware specific register offsets and masks to
>   pcie-designware.h header file.
> - Applied settings based on bus data rate rather than link generation.
> - Addressed review comments from Bjorn and Frank.
> 
> Shashank Babu Chinta Venkata (3):
>   PCI: qcom: Refactor common code
>   PCI: qcom: Add equalization settings for 16GT/s
>   PCI: qcom: Add rx margining settings for 16GT/s
> 
>  drivers/pci/controller/dwc/Kconfig            |   5 +
>  drivers/pci/controller/dwc/Makefile           |   1 +
>  drivers/pci/controller/dwc/pcie-designware.h  |  30 ++++
>  drivers/pci/controller/dwc/pcie-qcom-common.c | 129 ++++++++++++++++++
>  drivers/pci/controller/dwc/pcie-qcom-common.h |  14 ++
>  drivers/pci/controller/dwc/pcie-qcom-ep.c     |  44 ++----
>  drivers/pci/controller/dwc/pcie-qcom.c        |  72 ++--------
>  7 files changed, 201 insertions(+), 94 deletions(-)
>  create mode 100644 drivers/pci/controller/dwc/pcie-qcom-common.c
>  create mode 100644 drivers/pci/controller/dwc/pcie-qcom-common.h
> 
> -- 
> 2.43.2
> 

FWIW: I think the subject of the cover-letter should have been prefixed with:
"PCI: qcom: "


Kind regards,
Niklas