[PATCH net-next 0/2] net: phy: adin: add support for setting led-, link-status-pin polarity

[Josua Mayer]

ADIN1300 supports software control over pin polarity for both LED_0 and
LINK_ST pins.

Add bindings for specifying the polarity in device-tree, and implement
settings in adin1300 phy driver.

Signed-off-by: Josua Mayer <josua@xxxxxxxxxxxxx>
---
Josua Mayer (2):
      dt-bindings: net: adin: add pin polarity properties for LED_0, LINK_ST
      net: phy: adin: add support for setting led-, link-status-pin polarity

 .../devicetree/bindings/net/adi,adin.yaml          | 18 ++++++++
 drivers/net/phy/adin.c                             | 53 ++++++++++++++++++++++
 2 files changed, 71 insertions(+)
---
base-commit: 4cece764965020c22cff7665b18a012006359095
change-id: 20240419-adin-pin-polarity-30f7f85f6756

Sincerely,
-- 
Josua Mayer <josua@xxxxxxxxxxxxx>