Re: [PATCH v2 1/8] ASoC: dt-bindings: wcd937x: add bindings for wcd937x

[Mohammad Rafi Shaik]

On 4/17/2024 9:21 PM, Krzysztof Kozlowski wrote:
> On 16/04/2024 08:35, Mohammad Rafi Shaik wrote:
> > From: Prasad Kumpatla <quic_pkumpatl@xxxxxxxxxxx>
> >
> > Qualcomm WCD9370/WCD9375 Codec is a standalone Hi-Fi audio codec IC
> > connected over SoundWire. This device has two SoundWire device RX and
> > TX respectively, supporting 3 x ADCs, ClassH, Ear, Aux PA, 2xHPH,
> > 6 DMICs, MBHC.
> >
> > Co-developed-by: Mohammad Rafi Shaik <quic_mohs@xxxxxxxxxxx>
> > Signed-off-by: Mohammad Rafi Shaik <quic_mohs@xxxxxxxxxxx>
> > Signed-off-by: Prasad Kumpatla <quic_pkumpatl@xxxxxxxxxxx>
> > ---
> >   .../bindings/sound/qcom,wcd937x.yaml          | 119 ++++++++++++++++++
> >   1 file changed, 119 insertions(+)
> >   create mode 100644 Documentation/devicetree/bindings/sound/qcom,wcd937x.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/sound/qcom,wcd937x.yaml b/Documentation/devicetree/bindings/sound/qcom,wcd937x.yaml
> > new file mode 100644
> > index 000000000000..b45f823af04f
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/sound/qcom,wcd937x.yaml
>
> No wildcards. This is wcd9370, right?
>
> > @@ -0,0 +1,119 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/sound/qcom,wcd937x.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Qualcomm WCD9370 Audio Codec
> > +
> > +maintainers:
> > +  - Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx>
> > +
> > +description: |
>
> Do not need '|' unless you need to preserve formatting.

ACK

will remove '|' in next version patch set.

> > +  Qualcomm WCD9370 Codec is a standalone Hi-Fi audio codec IC.
> > +  It has RX and TX Soundwire slave devices.
> > +
> > +properties:
> > +  compatible:
> > +    enum:
> > +      - qcom,wcd9370-codec
>
> Can it be anything else than codec?
>
> > +
> > +  reset-gpios:
> > +    description: GPIO spec for reset line to use
> > +    maxItems: 1
> > +
> > +  vdd-buck-supply:
> > +    description: A reference to the 1.8V buck supply
> > +
> > +  vdd-rxtx-supply:
> > +    description: A reference to the 1.8V rx supply
> > +
> > +  vdd-px-supply:
> > +    description: A reference to the 1.8V I/O supply
> > +
> > +  vdd-mic-bias-supply:
> > +    description: A reference to the 3.8V mic bias supply
> > +
> > +  qcom,tx-device:
> > +    $ref: /schemas/types.yaml#/definitions/phandle-array
> > +    description: A reference to Soundwire tx device phandle
>
> "A reference to phandle" is not correct. Phandle is the reference.
> Anyway, both are redundant.

ACK,

> > +  qcom,rx-device:
> > +    $ref: /schemas/types.yaml#/definitions/phandle-array
> > +    description: A reference to Soundwire rx device phandle
> > +
> > +  qcom,micbias1-microvolt:
> > +    description: micbias1 voltage
> > +    minimum: 1800000
> > +    maximum: 2850000
> > +
> > +  qcom,micbias2-microvolt:
> > +    description: micbias2 voltage
> > +    minimum: 1800000
> > +    maximum: 2850000
> > +
> > +  qcom,micbias3-microvolt:
> > +    description: micbias3 voltage
> > +    minimum: 1800000
> > +    maximum: 2850000
> > +
> > +  '#sound-dai-cells':
> > +    const: 1
> > +
> > +required:
> > +  - compatible
> > +  - reset-gpios
> > +  - qcom,tx-device
> > +  - qcom,rx-device
> > +  - qcom,micbias1-microvolt
> > +  - qcom,micbias2-microvolt
> > +  - qcom,micbias3-microvolt
> > +  - "#sound-dai-cells"
> > +
> > +unevaluatedProperties: false
>
> This does not make sense without ref to dai-common, so this should point
> you to missing ref.

ACK,

Will add missing dai-common reference.
> > +
> > +examples:
> > +  - |
> > +    codec {
> > +        compatible = "qcom,wcd9370-codec";
> > +        pinctrl-names = "default", "sleep";
> > +        pinctrl-0 = <&wcd_reset_n>;
> > +        pinctrl-1 = <&wcd_reset_n_sleep>;
> > +        reset-gpios = <&tlmm 83 0>;
> > +        vdd-buck-supply = <&vreg_l17b_1p8>;
> > +        vdd-rxtx-supply = <&vreg_l18b_1p8>;
> > +        vdd-px-supply = <&vreg_l18b_1p8>;
> > +        vdd-mic-bias-supply = <&vreg_bob>;
> > +        qcom,micbias1-microvolt = <1800000>;
> > +        qcom,micbias2-microvolt = <1800000>;
> > +        qcom,micbias3-microvolt = <1800000>;
> > +        qcom,rx-device = <&wcd937x_rx>;
> > +        qcom,tx-device = <&wcd937x_tx>;
> > +        #sound-dai-cells = <1>;
> > +    };
> > +
> > +    /* ... */
> > +
> > +    soundwire@3210000 {
> > +        #address-cells = <2>;
>
> Drop this and other nodes.
>
> Best regards,
> Krzysztof

ACK,

will use the qcom,wcd93xx-common.yaml file and will drop the common 
duplicate nodes

Thanks and Regards,
Rafi
>