Re: [PATCH v5 3/3] serial: sc16is7xx: add support for EXAR XR20M1172 UART

[Konstantin P.]

I do not think this is a requirement for a new version. I need to
wait. Some folks want to test my patches with their hardware)))

On Mon, Apr 22, 2024 at 9:30 AM Jiri Slaby <jirislaby@xxxxxxxxxx> wrote:
>
> On 20. 04. 24, 20:22, Konstantin Pugin wrote:
> > From: Konstantin Pugin <ria.freelander@xxxxxxxxx>
> >
> > XR20M1172 register set is mostly compatible with SC16IS762, but it has
> > a support for additional division rates of UART with special DLD register.
> > So, add handling this register by appropriate devicetree bindings.
> ...
> > --- a/drivers/tty/serial/sc16is7xx.c
> > +++ b/drivers/tty/serial/sc16is7xx.c
> ...
> > @@ -555,18 +578,43 @@ static bool sc16is7xx_regmap_noinc(struct device *dev, unsigned int reg)
> >       return reg == SC16IS7XX_RHR_REG;
> >   }
> >
> > +static bool sc16is7xx_has_dld(struct device *dev)
> > +{
> > +             struct sc16is7xx_port *s = dev_get_drvdata(dev);
> > +
> > +             if (s->devtype == &xr20m1172_devtype)
> > +                     return true;
> > +             return false;
>
> :) so this should simply be:
>
> return s->devtype == &xr20m1172_devtype;
>
> ...
> > @@ -1002,6 +1052,7 @@ static void sc16is7xx_set_termios(struct uart_port *port,
> >                                 const struct ktermios *old)
> >   {
> >       struct sc16is7xx_one *one = to_sc16is7xx_one(port, port);
> > +     bool has_dld = sc16is7xx_has_dld(port->dev);
> >       unsigned int lcr, flow = 0;
> >       int baud;
> >       unsigned long flags;
> > @@ -1084,7 +1135,7 @@ static void sc16is7xx_set_termios(struct uart_port *port,
> >       /* Get baud rate generator configuration */
> >       baud = uart_get_baud_rate(port, termios, old,
> >                                 port->uartclk / 16 / 4 / 0xffff,
> > -                               port->uartclk / 16);
> > +                               port->uartclk / (has_dld ? 4 : 16));
>
> Could you do this instead:
> unsigned int divisor = sc16is7xx_has_dld(port->dev) ? 4 : 16;
>
> ...
>
> uart_get_baud_rate(..., port->uartclk / divisor);
>
>
> I am not sure the above warrants for a new version. Just in case you are
> sending one.
>
> thanks,
> --
> js
> suse labs
>