[PATCH 1/3] dt-bindings: net: mx93: add enet_clk_sel binding

[Steffen Trumtrar]

When the eQOS on the i.MX93 is used in RMII mode, the TX_CLK must be set
to output mode. To do this, the ENET_CLK_SEL register must be accessed.
This register is located in a GPR register space.

Signed-off-by: Steffen Trumtrar <s.trumtrar@xxxxxxxxxxxxxx>
---
 Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml b/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml
index 4c01cae7c93a7..1d1c8b90da871 100644
--- a/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml
+++ b/Documentation/devicetree/bindings/net/nxp,dwmac-imx.yaml
@@ -56,6 +56,16 @@ properties:
         - tx
         - mem
 
+  enet_clk_sel:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to the GPR syscon
+          - description: the offset of the GPR register
+    description:
+      Should be phandle/offset pair. The phandle to the syscon node which
+      encompases the GPR register, and the offset of the GPR register.
+
   intf_mode:
     $ref: /schemas/types.yaml#/definitions/phandle-array
     items:

-- 
2.43.2