Re: [PATCH 1/4] hwmon (max6639): Use regmap

[Naresh Solanki]

Hi Guenter,

On Wed, 17 Apr 2024 at 02:55, Guenter Roeck <linux@xxxxxxxxxxxx> wrote:
>
> On Tue, Apr 16, 2024 at 10:47:14PM +0530, Naresh Solanki wrote:
> > Add regmap support.
> >
>
> Missing (and not really utilizing) the benefits of using regmap.
This is just replacing with regmap support
>
> > Signed-off-by: Naresh Solanki <naresh.solanki@xxxxxxxxxxxxx>
> > ---
> >  drivers/hwmon/Kconfig   |   1 +
> >  drivers/hwmon/max6639.c | 157 ++++++++++++++++++++--------------------
> >  2 files changed, 80 insertions(+), 78 deletions(-)
> >
> > diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> > index c89776d91795..257ec5360e35 100644
> > --- a/drivers/hwmon/Kconfig
> > +++ b/drivers/hwmon/Kconfig
> > @@ -1223,6 +1223,7 @@ config SENSORS_MAX6621
> >  config SENSORS_MAX6639
> >       tristate "Maxim MAX6639 sensor chip"
> >       depends on I2C
> > +     select REGMAP_I2C
> >       help
> >         If you say yes here you get support for the MAX6639
> >         sensor chips.
> > diff --git a/drivers/hwmon/max6639.c b/drivers/hwmon/max6639.c
> > index aa7f21ab2395..1af93fc53cb5 100644
> > --- a/drivers/hwmon/max6639.c
> > +++ b/drivers/hwmon/max6639.c
> > @@ -20,6 +20,7 @@
> >  #include <linux/err.h>
> >  #include <linux/mutex.h>
> >  #include <linux/platform_data/max6639.h>
> > +#include <linux/regmap.h>
> >
> >  /* Addresses to scan */
> >  static const unsigned short normal_i2c[] = { 0x2c, 0x2e, 0x2f, I2C_CLIENT_END };
> > @@ -57,6 +58,8 @@ static const unsigned short normal_i2c[] = { 0x2c, 0x2e, 0x2f, I2C_CLIENT_END };
> >
> >  #define MAX6639_FAN_CONFIG3_THERM_FULL_SPEED 0x40
> >
> > +#define MAX6639_NDEV                         2
> > +
> >  static const int rpm_ranges[] = { 2000, 4000, 8000, 16000 };
> >
> >  #define FAN_FROM_REG(val, rpm_range) ((val) == 0 || (val) == 255 ? \
> > @@ -67,7 +70,7 @@ static const int rpm_ranges[] = { 2000, 4000, 8000, 16000 };
> >   * Client data (each client gets its own)
> >   */
> >  struct max6639_data {
> > -     struct i2c_client *client;
> > +     struct regmap *regmap;
> >       struct mutex update_lock;
> >       bool valid;             /* true if following fields are valid */
> >       unsigned long last_updated;     /* In jiffies */
> > @@ -95,9 +98,8 @@ struct max6639_data {
> >  static struct max6639_data *max6639_update_device(struct device *dev)
> >  {
> >       struct max6639_data *data = dev_get_drvdata(dev);
> > -     struct i2c_client *client = data->client;
> >       struct max6639_data *ret = data;
> > -     int i;
> > +     int i, err;
> >       int status_reg;
> >
> >       mutex_lock(&data->update_lock);
> > @@ -105,39 +107,35 @@ static struct max6639_data *max6639_update_device(struct device *dev)
>
> Conversions to regmap should drop all local caching and use regmap
> for caching (where appropriate) instead.
max6639_update_device deals with volatile registers & caching isn't
available for these.

Please let me know if there is specific optimization that you were looking for.

Regards,
Naresh
>
> Guenter