Re: [PATCH v3 3/3] arm64: dts: imx8dxl-evk: add audio nodes

From: Frank Li
Date: Mon Apr 22 2024 - 14:51:48 EST

Next message: Oleg Nesterov: "Re: [PATCH] sched/isolation: fix boot crash when the boot CPU is nohz_full"
Previous message: Jani Nikula: "Re: [PATCH v1 1/1] drm: fixed: Don't use "proxy" headers"
In reply to: Frank Li: "[PATCH v3 3/3] arm64: dts: imx8dxl-evk: add audio nodes"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Mon, Apr 22, 2024 at 02:44:54PM -0400, Frank Li wrote:
> Add audio nodes for imx8dxl-evk boards.
>
> Signed-off-by: Frank Li <Frank.Li@xxxxxxx>
> ---
> arch/arm64/boot/dts/freescale/imx8dxl-evk.dts | 231 ++++++++++++++++++++++++++
> 1 file changed, 231 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
> index 2123d431e0613..5b5a7b47217c3 100644
> --- a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
> @@ -125,6 +125,78 @@ mii_select: regulator-4 {
> enable-active-high;
> regulator-always-on;
> };
> +
> + bt_sco_codec: audio-codec-bt {
> + compatible = "linux,bt-sco";
> + #sound-dai-cells = <1>;
> + };
> +
> + sound-bt-sco {
> + compatible = "simple-audio-card";
> + simple-audio-card,name = "bt-sco-audio";
> + simple-audio-card,format = "dsp_a";
> + simple-audio-card,bitclock-inversion;
> + simple-audio-card,frame-master = <&btcpu>;
> + simple-audio-card,bitclock-master = <&btcpu>;
> +
> + btcpu: simple-audio-card,cpu {
> + sound-dai = <&sai0>;
> + dai-tdm-slot-num = <2>;
> + dai-tdm-slot-width = <16>;
> + };
> +
> + simple-audio-card,codec {
> + sound-dai = <&bt_sco_codec 1>;
> + };
> + };
> +
> + sound-wm8960-1 {
> + compatible = "fsl,imx7d-evk-wm8960", "fsl,imx-audio-wm8960";
> + model = "wm8960-audio";
> + audio-cpu = <&sai1>;
> + audio-codec = <&wm8960_1>;
> + audio-asrc = <&asrc0>;
> + audio-routing = "Headphone Jack", "HP_L",
> + "Headphone Jack", "HP_R",
> + "Ext Spk", "SPK_LP",
> + "Ext Spk", "SPK_LN",
> + "Ext Spk", "SPK_RP",
> + "Ext Spk", "SPK_RN",
> + "LINPUT1", "Mic Jack",
> + "Mic Jack", "MICB";
> + };
> +
> + sound-wm8960-2 {
> + compatible = "fsl,imx7d-evk-wm8960", "fsl,imx-audio-wm8960";
> + model = "wm8960-audio-2";
> + audio-cpu = <&sai2>;
> + audio-codec = <&wm8960_2>;
> + audio-routing =
> + "Headphone Jack", "HP_L",
> + "Headphone Jack", "HP_R",
> + "Ext Spk", "SPK_LP",
> + "Ext Spk", "SPK_LN",
> + "Ext Spk", "SPK_RP",
> + "Ext Spk", "SPK_RN",
> + "LINPUT1", "Mic Jack",
> + "Mic Jack", "MICB";

Sorry, I just change sound-wm8960-1 and forget change this one and
sound-wm8960-3, will fix it at next version.

Frank

> + };
> +
> + sound-wm8960-3 {
> + compatible = "fsl,imx7d-evk-wm8960", "fsl,imx-audio-wm8960";
> + model = "wm8960-audio-3";
> + audio-cpu = <&sai3>;
> + audio-codec = <&wm8960_3>;
> + audio-routing =
> + "Headphone Jack", "HP_L",
> + "Headphone Jack", "HP_R",
> + "Ext Spk", "SPK_LP",
> + "Ext Spk", "SPK_LN",
> + "Ext Spk", "SPK_RP",
> + "Ext Spk", "SPK_RN",
> + "LINPUT1", "Mic Jack",
> + "Mic Jack", "MICB";
> + };
> };
>
> &adc0 {
> @@ -132,6 +204,11 @@ &adc0 {
> status = "okay";
> };
>
> +&asrc0 {
> + fsl,asrc-rate = <48000>;
> + status = "okay";
> +};
> +
> &eqos {
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_eqos>;
> @@ -259,6 +336,78 @@ max7322: gpio@68 {
> };
> };
>
> + i2c@1 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x1>;
> +
> + wm8960_1: audio-codec@1a {
> + compatible = "wlf,wm8960";
> + reg = <0x1a>;
> + clocks = <&mclkout1_lpcg IMX_LPCG_CLK_0>;
> + clock-names = "mclk";
> + assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
> + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
> + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
> + <&mclkout1_lpcg IMX_LPCG_CLK_0>;
> + assigned-clock-rates = <786432000>,
> + <49152000>,
> + <12288000>,
> + <12288000>;
> + wlf,shared-lrclk;
> + wlf,hp-cfg = <2 2 3>;
> + wlf,gpio-cfg = <1 3>;
> + };
> + };
> +
> + i2c@2 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x2>;
> +
> + wm8960_2: audio-codec@1a {
> + compatible = "wlf,wm8960";
> + reg = <0x1a>;
> + clocks = <&mclkout1_lpcg IMX_LPCG_CLK_0>;
> + clock-names = "mclk";
> + assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
> + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
> + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
> + <&mclkout1_lpcg IMX_LPCG_CLK_0>;
> + assigned-clock-rates = <786432000>,
> + <49152000>,
> + <12288000>,
> + <12288000>;
> + wlf,shared-lrclk;
> + wlf,hp-cfg = <2 2 3>;
> + wlf,gpio-cfg = <1 3>;
> + };
> + };
> +
> + i2c@3 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x3>;
> +
> + wm8960_3: audio-codec@1a {
> + compatible = "wlf,wm8960";
> + reg = <0x1a>;
> + clocks = <&mclkout1_lpcg IMX_LPCG_CLK_0>;
> + clock-names = "mclk";
> + assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
> + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
> + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
> + <&mclkout1_lpcg IMX_LPCG_CLK_0>;
> + assigned-clock-rates = <786432000>,
> + <49152000>,
> + <12288000>,
> + <12288000>;
> + wlf,shared-lrclk;
> + wlf,hp-cfg = <2 2 3>;
> + wlf,gpio-cfg = <1 3>;
> + };
> + };
> +
> i2c@4 {
> #address-cells = <1>;
> #size-cells = <0>;
> @@ -362,6 +511,53 @@ &lsio_gpio5 {
> status = "okay";
> };
>
> +&sai0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_sai0>;
> + #sound-dai-cells = <0>;
> + assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
> + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
> + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
> + <&sai0_lpcg IMX_LPCG_CLK_0>;
> + assigned-clock-rates = <786432000>, <49152000>, <12288000>, <49152000>;
> + status = "okay";
> +};
> +
> +&sai1 {
> + assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
> + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
> + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
> + <&sai1_lpcg IMX_LPCG_CLK_0>;
> + assigned-clock-rates = <786432000>, <49152000>, <12288000>, <49152000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_sai1>;
> + status = "okay";
> +};
> +
> +&sai2 {
> + assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
> + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
> + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
> + <&sai2_lpcg IMX_LPCG_CLK_0>;
> + assigned-clock-rates = <786432000>, <49152000>, <12288000>, <49152000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_sai2>;
> + fsl,sai-asynchronous;
> + status = "okay";
> +};
> +
> +&sai3 {
> + assigned-clocks = <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_PLL>,
> + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_SLV_BUS>,
> + <&clk IMX_SC_R_AUDIO_PLL_0 IMX_SC_PM_CLK_MST_BUS>,
> + <&sai3_lpcg IMX_LPCG_CLK_0>;
> + assigned-clock-rates = <786432000>, <49152000>, <12288000>, <49152000>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_sai3>;
> + fsl,sai-asynchronous;
> + status = "okay";
> +};
> +
> &thermal_zones {
> pmic-thermal {
> polling-delay-passive = <250>;
> @@ -595,6 +791,41 @@ IMX8DXL_UART0_TX_ADMA_UART0_TX 0x06000020
> >;
> };
>
> + pinctrl_sai0: sai0grp {
> + fsl,pins = <
> + IMX8DXL_SPI0_CS0_ADMA_SAI0_RXD 0x06000060
> + IMX8DXL_SPI0_CS1_ADMA_SAI0_RXC 0x06000040
> + IMX8DXL_SPI0_SCK_ADMA_SAI0_TXC 0x06000060
> + IMX8DXL_SPI0_SDI_ADMA_SAI0_TXD 0x06000060
> + IMX8DXL_SPI0_SDO_ADMA_SAI0_TXFS 0x06000040
> + >;
> + };
> +
> + pinctrl_sai1: sai1grp {
> + fsl,pins = <
> + IMX8DXL_FLEXCAN0_RX_ADMA_SAI1_TXC 0x06000040
> + IMX8DXL_FLEXCAN0_TX_ADMA_SAI1_TXFS 0x06000040
> + IMX8DXL_FLEXCAN1_RX_ADMA_SAI1_TXD 0x06000060
> + IMX8DXL_FLEXCAN1_TX_ADMA_SAI1_RXD 0x06000060
> + >;
> + };
> +
> + pinctrl_sai2: sai2grp {
> + fsl,pins = <
> + IMX8DXL_SNVS_TAMPER_OUT3_ADMA_SAI2_RXC 0x06000040
> + IMX8DXL_SNVS_TAMPER_IN0_ADMA_SAI2_RXFS 0x06000040
> + IMX8DXL_SNVS_TAMPER_OUT4_ADMA_SAI2_RXD 0x06000060
> + >;
> + };
> +
> + pinctrl_sai3: sai3grp {
> + fsl,pins = <
> + IMX8DXL_SNVS_TAMPER_IN1_ADMA_SAI3_RXC 0x06000040
> + IMX8DXL_SNVS_TAMPER_IN3_ADMA_SAI3_RXFS 0x06000040
> + IMX8DXL_SNVS_TAMPER_IN2_ADMA_SAI3_RXD 0x06000060
> + >;
> + };
> +
> pinctrl_usdhc1: usdhc1grp {
> fsl,pins = <
> IMX8DXL_EMMC0_CLK_CONN_EMMC0_CLK 0x06000041
>
> --
> 2.34.1
>

Next message: Oleg Nesterov: "Re: [PATCH] sched/isolation: fix boot crash when the boot CPU is nohz_full"
Previous message: Jani Nikula: "Re: [PATCH v1 1/1] drm: fixed: Don't use "proxy" headers"
In reply to: Frank Li: "[PATCH v3 3/3] arm64: dts: imx8dxl-evk: add audio nodes"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]