[PATCH net v2 1/2] net: dsa: mv88e6xxx: Add support for model-specific pre- and post-reset handlers
From: Matthias Schiffer
Date: Tue Apr 23 2024 - 03:48:43 EST
Instead of calling mv88e6xxx_g2_eeprom_wait() directly from
mv88e6xxx_hardware_reset(), add configurable pre- and post-reset hard
reset handlers. Initially, the handlers are set to
mv88e6xxx_g2_eeprom_wait() for all families that have get/set_eeprom()
to match the existing behavior. No functional change intended (except
for additional error messages on failure).
Fixes: 6ccf50d4d474 ("net: dsa: mv88e6xxx: Avoid EEPROM timeout when EEPROM is absent")
Signed-off-by: Matthias Schiffer <matthias.schiffer@xxxxxxxxxxxxxxx>
---
v2: Moved comment back to mv88e6xxx_hardware_reset()
drivers/net/dsa/mv88e6xxx/chip.c | 50 +++++++++++++++++++++++++++++---
drivers/net/dsa/mv88e6xxx/chip.h | 6 ++++
2 files changed, 52 insertions(+), 4 deletions(-)
diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index 59b5dd0e2f41d..21853689f6b39 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -3123,6 +3123,7 @@ static int mv88e6xxx_software_reset(struct mv88e6xxx_chip *chip)
static void mv88e6xxx_hardware_reset(struct mv88e6xxx_chip *chip)
{
struct gpio_desc *gpiod = chip->reset;
+ int err;
/* If there is a GPIO connected to the reset pin, toggle it */
if (gpiod) {
@@ -3131,17 +3132,26 @@ static void mv88e6xxx_hardware_reset(struct mv88e6xxx_chip *chip)
* mid-byte, causing the first EEPROM read after the reset
* from the wrong location resulting in the switch booting
* to wrong mode and inoperable.
+ * For this reason, switch families with EEPROM support
+ * generally wait for EEPROM loads to complete as their pre-
+ * and post-reset handlers.
*/
- if (chip->info->ops->get_eeprom)
- mv88e6xxx_g2_eeprom_wait(chip);
+ if (chip->info->ops->hardware_reset_pre) {
+ err = chip->info->ops->hardware_reset_pre(chip);
+ if (err)
+ dev_err(chip->dev, "pre-reset error: %d\n", err);
+ }
gpiod_set_value_cansleep(gpiod, 1);
usleep_range(10000, 20000);
gpiod_set_value_cansleep(gpiod, 0);
usleep_range(10000, 20000);
- if (chip->info->ops->get_eeprom)
- mv88e6xxx_g2_eeprom_wait(chip);
+ if (chip->info->ops->hardware_reset_post) {
+ err = chip->info->ops->hardware_reset_post(chip);
+ if (err)
+ dev_err(chip->dev, "post-reset error: %d\n", err);
+ }
}
}
@@ -4371,6 +4381,8 @@ static const struct mv88e6xxx_ops mv88e6141_ops = {
.watchdog_ops = &mv88e6390_watchdog_ops,
.mgmt_rsvd2cpu = mv88e6390_g1_mgmt_rsvd2cpu,
.pot_clear = mv88e6xxx_g2_pot_clear,
+ .hardware_reset_pre = mv88e6xxx_g2_eeprom_wait,
+ .hardware_reset_post = mv88e6xxx_g2_eeprom_wait,
.reset = mv88e6352_g1_reset,
.rmu_disable = mv88e6390_g1_rmu_disable,
.atu_get_hash = mv88e6165_g1_atu_get_hash,
@@ -4561,6 +4573,8 @@ static const struct mv88e6xxx_ops mv88e6172_ops = {
.watchdog_ops = &mv88e6097_watchdog_ops,
.mgmt_rsvd2cpu = mv88e6352_g2_mgmt_rsvd2cpu,
.pot_clear = mv88e6xxx_g2_pot_clear,
+ .hardware_reset_pre = mv88e6xxx_g2_eeprom_wait,
+ .hardware_reset_post = mv88e6xxx_g2_eeprom_wait,
.reset = mv88e6352_g1_reset,
.rmu_disable = mv88e6352_g1_rmu_disable,
.atu_get_hash = mv88e6165_g1_atu_get_hash,
@@ -4661,6 +4675,8 @@ static const struct mv88e6xxx_ops mv88e6176_ops = {
.watchdog_ops = &mv88e6097_watchdog_ops,
.mgmt_rsvd2cpu = mv88e6352_g2_mgmt_rsvd2cpu,
.pot_clear = mv88e6xxx_g2_pot_clear,
+ .hardware_reset_pre = mv88e6xxx_g2_eeprom_wait,
+ .hardware_reset_post = mv88e6xxx_g2_eeprom_wait,
.reset = mv88e6352_g1_reset,
.rmu_disable = mv88e6352_g1_rmu_disable,
.atu_get_hash = mv88e6165_g1_atu_get_hash,
@@ -4755,6 +4771,8 @@ static const struct mv88e6xxx_ops mv88e6190_ops = {
.watchdog_ops = &mv88e6390_watchdog_ops,
.mgmt_rsvd2cpu = mv88e6390_g1_mgmt_rsvd2cpu,
.pot_clear = mv88e6xxx_g2_pot_clear,
+ .hardware_reset_pre = mv88e6xxx_g2_eeprom_wait,
+ .hardware_reset_post = mv88e6xxx_g2_eeprom_wait,
.reset = mv88e6352_g1_reset,
.rmu_disable = mv88e6390_g1_rmu_disable,
.atu_get_hash = mv88e6165_g1_atu_get_hash,
@@ -4813,6 +4831,8 @@ static const struct mv88e6xxx_ops mv88e6190x_ops = {
.watchdog_ops = &mv88e6390_watchdog_ops,
.mgmt_rsvd2cpu = mv88e6390_g1_mgmt_rsvd2cpu,
.pot_clear = mv88e6xxx_g2_pot_clear,
+ .hardware_reset_pre = mv88e6xxx_g2_eeprom_wait,
+ .hardware_reset_post = mv88e6xxx_g2_eeprom_wait,
.reset = mv88e6352_g1_reset,
.rmu_disable = mv88e6390_g1_rmu_disable,
.atu_get_hash = mv88e6165_g1_atu_get_hash,
@@ -4869,6 +4889,8 @@ static const struct mv88e6xxx_ops mv88e6191_ops = {
.watchdog_ops = &mv88e6390_watchdog_ops,
.mgmt_rsvd2cpu = mv88e6390_g1_mgmt_rsvd2cpu,
.pot_clear = mv88e6xxx_g2_pot_clear,
+ .hardware_reset_pre = mv88e6xxx_g2_eeprom_wait,
+ .hardware_reset_post = mv88e6xxx_g2_eeprom_wait,
.reset = mv88e6352_g1_reset,
.rmu_disable = mv88e6390_g1_rmu_disable,
.atu_get_hash = mv88e6165_g1_atu_get_hash,
@@ -4928,6 +4950,8 @@ static const struct mv88e6xxx_ops mv88e6240_ops = {
.watchdog_ops = &mv88e6097_watchdog_ops,
.mgmt_rsvd2cpu = mv88e6352_g2_mgmt_rsvd2cpu,
.pot_clear = mv88e6xxx_g2_pot_clear,
+ .hardware_reset_pre = mv88e6xxx_g2_eeprom_wait,
+ .hardware_reset_post = mv88e6xxx_g2_eeprom_wait,
.reset = mv88e6352_g1_reset,
.rmu_disable = mv88e6352_g1_rmu_disable,
.atu_get_hash = mv88e6165_g1_atu_get_hash,
@@ -4981,6 +5005,8 @@ static const struct mv88e6xxx_ops mv88e6250_ops = {
.watchdog_ops = &mv88e6250_watchdog_ops,
.mgmt_rsvd2cpu = mv88e6352_g2_mgmt_rsvd2cpu,
.pot_clear = mv88e6xxx_g2_pot_clear,
+ .hardware_reset_pre = mv88e6xxx_g2_eeprom_wait,
+ .hardware_reset_post = mv88e6xxx_g2_eeprom_wait,
.reset = mv88e6250_g1_reset,
.vtu_getnext = mv88e6185_g1_vtu_getnext,
.vtu_loadpurge = mv88e6185_g1_vtu_loadpurge,
@@ -5028,6 +5054,8 @@ static const struct mv88e6xxx_ops mv88e6290_ops = {
.watchdog_ops = &mv88e6390_watchdog_ops,
.mgmt_rsvd2cpu = mv88e6390_g1_mgmt_rsvd2cpu,
.pot_clear = mv88e6xxx_g2_pot_clear,
+ .hardware_reset_pre = mv88e6xxx_g2_eeprom_wait,
+ .hardware_reset_post = mv88e6xxx_g2_eeprom_wait,
.reset = mv88e6352_g1_reset,
.rmu_disable = mv88e6390_g1_rmu_disable,
.atu_get_hash = mv88e6165_g1_atu_get_hash,
@@ -5087,6 +5115,8 @@ static const struct mv88e6xxx_ops mv88e6320_ops = {
.watchdog_ops = &mv88e6390_watchdog_ops,
.mgmt_rsvd2cpu = mv88e6352_g2_mgmt_rsvd2cpu,
.pot_clear = mv88e6xxx_g2_pot_clear,
+ .hardware_reset_pre = mv88e6xxx_g2_eeprom_wait,
+ .hardware_reset_post = mv88e6xxx_g2_eeprom_wait,
.reset = mv88e6352_g1_reset,
.vtu_getnext = mv88e6185_g1_vtu_getnext,
.vtu_loadpurge = mv88e6185_g1_vtu_loadpurge,
@@ -5133,6 +5163,8 @@ static const struct mv88e6xxx_ops mv88e6321_ops = {
.set_egress_port = mv88e6095_g1_set_egress_port,
.watchdog_ops = &mv88e6390_watchdog_ops,
.mgmt_rsvd2cpu = mv88e6352_g2_mgmt_rsvd2cpu,
+ .hardware_reset_pre = mv88e6xxx_g2_eeprom_wait,
+ .hardware_reset_post = mv88e6xxx_g2_eeprom_wait,
.reset = mv88e6352_g1_reset,
.vtu_getnext = mv88e6185_g1_vtu_getnext,
.vtu_loadpurge = mv88e6185_g1_vtu_loadpurge,
@@ -5183,6 +5215,8 @@ static const struct mv88e6xxx_ops mv88e6341_ops = {
.watchdog_ops = &mv88e6390_watchdog_ops,
.mgmt_rsvd2cpu = mv88e6390_g1_mgmt_rsvd2cpu,
.pot_clear = mv88e6xxx_g2_pot_clear,
+ .hardware_reset_pre = mv88e6xxx_g2_eeprom_wait,
+ .hardware_reset_post = mv88e6xxx_g2_eeprom_wait,
.reset = mv88e6352_g1_reset,
.rmu_disable = mv88e6390_g1_rmu_disable,
.atu_get_hash = mv88e6165_g1_atu_get_hash,
@@ -5338,6 +5372,8 @@ static const struct mv88e6xxx_ops mv88e6352_ops = {
.watchdog_ops = &mv88e6097_watchdog_ops,
.mgmt_rsvd2cpu = mv88e6352_g2_mgmt_rsvd2cpu,
.pot_clear = mv88e6xxx_g2_pot_clear,
+ .hardware_reset_pre = mv88e6xxx_g2_eeprom_wait,
+ .hardware_reset_post = mv88e6xxx_g2_eeprom_wait,
.reset = mv88e6352_g1_reset,
.rmu_disable = mv88e6352_g1_rmu_disable,
.atu_get_hash = mv88e6165_g1_atu_get_hash,
@@ -5400,6 +5436,8 @@ static const struct mv88e6xxx_ops mv88e6390_ops = {
.watchdog_ops = &mv88e6390_watchdog_ops,
.mgmt_rsvd2cpu = mv88e6390_g1_mgmt_rsvd2cpu,
.pot_clear = mv88e6xxx_g2_pot_clear,
+ .hardware_reset_pre = mv88e6xxx_g2_eeprom_wait,
+ .hardware_reset_post = mv88e6xxx_g2_eeprom_wait,
.reset = mv88e6352_g1_reset,
.rmu_disable = mv88e6390_g1_rmu_disable,
.atu_get_hash = mv88e6165_g1_atu_get_hash,
@@ -5462,6 +5500,8 @@ static const struct mv88e6xxx_ops mv88e6390x_ops = {
.watchdog_ops = &mv88e6390_watchdog_ops,
.mgmt_rsvd2cpu = mv88e6390_g1_mgmt_rsvd2cpu,
.pot_clear = mv88e6xxx_g2_pot_clear,
+ .hardware_reset_pre = mv88e6xxx_g2_eeprom_wait,
+ .hardware_reset_post = mv88e6xxx_g2_eeprom_wait,
.reset = mv88e6352_g1_reset,
.rmu_disable = mv88e6390_g1_rmu_disable,
.atu_get_hash = mv88e6165_g1_atu_get_hash,
@@ -5527,6 +5567,8 @@ static const struct mv88e6xxx_ops mv88e6393x_ops = {
.watchdog_ops = &mv88e6393x_watchdog_ops,
.mgmt_rsvd2cpu = mv88e6393x_port_mgmt_rsvd2cpu,
.pot_clear = mv88e6xxx_g2_pot_clear,
+ .hardware_reset_pre = mv88e6xxx_g2_eeprom_wait,
+ .hardware_reset_post = mv88e6xxx_g2_eeprom_wait,
.reset = mv88e6352_g1_reset,
.rmu_disable = mv88e6390_g1_rmu_disable,
.atu_get_hash = mv88e6165_g1_atu_get_hash,
diff --git a/drivers/net/dsa/mv88e6xxx/chip.h b/drivers/net/dsa/mv88e6xxx/chip.h
index 85eb293381a7e..c34caf9815c5c 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.h
+++ b/drivers/net/dsa/mv88e6xxx/chip.h
@@ -487,6 +487,12 @@ struct mv88e6xxx_ops {
int (*ppu_enable)(struct mv88e6xxx_chip *chip);
int (*ppu_disable)(struct mv88e6xxx_chip *chip);
+ /* Additional handlers to run before and after hard reset, to make sure
+ * that the switch and EEPROM are in a good state.
+ */
+ int (*hardware_reset_pre)(struct mv88e6xxx_chip *chip);
+ int (*hardware_reset_post)(struct mv88e6xxx_chip *chip);
+
/* Switch Software Reset */
int (*reset)(struct mv88e6xxx_chip *chip);
--
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
https://www.tq-group.com/