[PATCH v2 1/4] i2c: i801: remove printout on handled timeouts

[Wolfram Sang]

I2C and SMBus timeouts are not something the user needs to be informed
about on controller level. The client driver may know if that really is
a problem and give more detailed information to the user. The controller
should just pass this information upwards. Remove the printout and turn
the SMBus-specific termination message to debug.

Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
---
 drivers/i2c/busses/i2c-i801.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index e577abc776c1..d2d2a6dbe29f 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -399,9 +399,7 @@ static int i801_check_post(struct i801_priv *priv, int status)
 	 * If the SMBus is still busy, we give up
 	 */
 	if (unlikely(status < 0)) {
-		dev_err(&priv->pci_dev->dev, "Transaction timeout\n");
 		/* try to stop the current command */
-		dev_dbg(&priv->pci_dev->dev, "Terminating the current operation\n");
 		outb_p(SMBHSTCNT_KILL, SMBHSTCNT(priv));
 		usleep_range(1000, 2000);
 		outb_p(0, SMBHSTCNT(priv));
@@ -410,7 +408,7 @@ static int i801_check_post(struct i801_priv *priv, int status)
 		status = inb_p(SMBHSTSTS(priv));
 		if ((status & SMBHSTSTS_HOST_BUSY) ||
 		    !(status & SMBHSTSTS_FAILED))
-			dev_err(&priv->pci_dev->dev,
+			dev_dbg(&priv->pci_dev->dev,
 				"Failed terminating the transaction\n");
 		return -ETIMEDOUT;
 	}
-- 
2.43.0