Re: [PATCH v21 7/9] usb: dwc3: qcom: Refactor IRQ handling in glue driver

From: Thinh Nguyen
Date: Tue Apr 23 2024 - 21:18:03 EST


On Sat, Apr 20, 2024, Krishna Kurapati wrote:
> On multiport supported controllers, each port has its own DP/DM and
> SuperSpeed (if super speed capable) interrupts. As per the bindings,
> their interrupt names differ from single-port ones by having a "_x"
> added as suffix (x being the port number). Identify from the interrupt
> names whether the controller is a multiport controller or not.
> Refactor dwc3_qcom_setup_irq() call to parse multiportinterrupts along
> with non-multiport ones accordingly.
>
> Signed-off-by: Krishna Kurapati <quic_kriskura@xxxxxxxxxxx>
> Reviewed-by: Bjorn Andersson <quic_bjorande@xxxxxxxxxxx>
> ---
> drivers/usb/dwc3/dwc3-qcom.c | 140 ++++++++++++++++++++++++++---------
> 1 file changed, 106 insertions(+), 34 deletions(-)
>
> diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
> index cae5dab8fcfc..5ddb694dd8e7 100644
> --- a/drivers/usb/dwc3/dwc3-qcom.c
> +++ b/drivers/usb/dwc3/dwc3-qcom.c
> @@ -52,6 +52,16 @@
> #define APPS_USB_AVG_BW 0
> #define APPS_USB_PEAK_BW MBps_to_icc(40)
>
> +/* Qualcomm SoCs with multiport support has up to 4 ports */
> +#define DWC3_QCOM_MAX_PORTS 4
> +
> +struct dwc3_qcom_port {
> + int qusb2_phy_irq;
> + int dp_hs_phy_irq;
> + int dm_hs_phy_irq;
> + int ss_phy_irq;
> +};
> +
> struct dwc3_qcom {
> struct device *dev;
> void __iomem *qscratch_base;
> @@ -59,11 +69,8 @@ struct dwc3_qcom {
> struct clk **clks;
> int num_clocks;
> struct reset_control *resets;
> -
> - int qusb2_phy_irq;
> - int dp_hs_phy_irq;
> - int dm_hs_phy_irq;
> - int ss_phy_irq;
> + struct dwc3_qcom_port ports[DWC3_QCOM_MAX_PORTS];
> + u8 num_ports;
> enum usb_device_speed usb2_speed;
>
> struct extcon_dev *edev;
> @@ -354,24 +361,24 @@ static void dwc3_qcom_disable_wakeup_irq(int irq)
>
> static void dwc3_qcom_disable_interrupts(struct dwc3_qcom *qcom)
> {
> - dwc3_qcom_disable_wakeup_irq(qcom->qusb2_phy_irq);
> + dwc3_qcom_disable_wakeup_irq(qcom->ports[0].qusb2_phy_irq);
>
> if (qcom->usb2_speed == USB_SPEED_LOW) {
> - dwc3_qcom_disable_wakeup_irq(qcom->dm_hs_phy_irq);
> + dwc3_qcom_disable_wakeup_irq(qcom->ports[0].dm_hs_phy_irq);
> } else if ((qcom->usb2_speed == USB_SPEED_HIGH) ||
> (qcom->usb2_speed == USB_SPEED_FULL)) {
> - dwc3_qcom_disable_wakeup_irq(qcom->dp_hs_phy_irq);
> + dwc3_qcom_disable_wakeup_irq(qcom->ports[0].dp_hs_phy_irq);
> } else {
> - dwc3_qcom_disable_wakeup_irq(qcom->dp_hs_phy_irq);
> - dwc3_qcom_disable_wakeup_irq(qcom->dm_hs_phy_irq);
> + dwc3_qcom_disable_wakeup_irq(qcom->ports[0].dp_hs_phy_irq);
> + dwc3_qcom_disable_wakeup_irq(qcom->ports[0].dm_hs_phy_irq);
> }
>
> - dwc3_qcom_disable_wakeup_irq(qcom->ss_phy_irq);
> + dwc3_qcom_disable_wakeup_irq(qcom->ports[0].ss_phy_irq);
> }
>
> static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom)
> {
> - dwc3_qcom_enable_wakeup_irq(qcom->qusb2_phy_irq, 0);
> + dwc3_qcom_enable_wakeup_irq(qcom->ports[0].qusb2_phy_irq, 0);
>
> /*
> * Configure DP/DM line interrupts based on the USB2 device attached to
> @@ -383,20 +390,20 @@ static void dwc3_qcom_enable_interrupts(struct dwc3_qcom *qcom)
> */
>
> if (qcom->usb2_speed == USB_SPEED_LOW) {
> - dwc3_qcom_enable_wakeup_irq(qcom->dm_hs_phy_irq,
> - IRQ_TYPE_EDGE_FALLING);
> + dwc3_qcom_enable_wakeup_irq(qcom->ports[0].dm_hs_phy_irq,
> + IRQ_TYPE_EDGE_FALLING);
> } else if ((qcom->usb2_speed == USB_SPEED_HIGH) ||
> (qcom->usb2_speed == USB_SPEED_FULL)) {
> - dwc3_qcom_enable_wakeup_irq(qcom->dp_hs_phy_irq,
> - IRQ_TYPE_EDGE_FALLING);
> + dwc3_qcom_enable_wakeup_irq(qcom->ports[0].dp_hs_phy_irq,
> + IRQ_TYPE_EDGE_FALLING);
> } else {
> - dwc3_qcom_enable_wakeup_irq(qcom->dp_hs_phy_irq,
> - IRQ_TYPE_EDGE_RISING);
> - dwc3_qcom_enable_wakeup_irq(qcom->dm_hs_phy_irq,
> - IRQ_TYPE_EDGE_RISING);
> + dwc3_qcom_enable_wakeup_irq(qcom->ports[0].dp_hs_phy_irq,
> + IRQ_TYPE_EDGE_RISING);
> + dwc3_qcom_enable_wakeup_irq(qcom->ports[0].dm_hs_phy_irq,
> + IRQ_TYPE_EDGE_RISING);
> }
>
> - dwc3_qcom_enable_wakeup_irq(qcom->ss_phy_irq, 0);
> + dwc3_qcom_enable_wakeup_irq(qcom->ports[0].ss_phy_irq, 0);
> }
>
> static int dwc3_qcom_suspend(struct dwc3_qcom *qcom, bool wakeup)
> @@ -517,42 +524,107 @@ static int dwc3_qcom_request_irq(struct dwc3_qcom *qcom, int irq,
> return ret;
> }
>
> -static int dwc3_qcom_setup_irq(struct platform_device *pdev)
> +static int dwc3_qcom_setup_port_irq(struct platform_device *pdev, int port_index, bool is_multiport)
> {
> struct dwc3_qcom *qcom = platform_get_drvdata(pdev);
> + const char *irq_name;
> int irq;
> int ret;
>
> - irq = platform_get_irq_byname_optional(pdev, "qusb2_phy");
> + if (is_multiport)
> + irq_name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "dp_hs_phy_%d", port_index + 1);
> + else
> + irq_name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "dp_hs_phy_irq");
> + if (!irq_name)
> + return -ENOMEM;
> +
> + irq = platform_get_irq_byname_optional(pdev, irq_name);
> if (irq > 0) {
> - ret = dwc3_qcom_request_irq(qcom, irq, "qusb2_phy");
> + ret = dwc3_qcom_request_irq(qcom, irq, irq_name);
> if (ret)
> return ret;
> - qcom->qusb2_phy_irq = irq;
> + qcom->ports[port_index].dp_hs_phy_irq = irq;
> }
>
> - irq = platform_get_irq_byname_optional(pdev, "dp_hs_phy_irq");
> + if (is_multiport)
> + irq_name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "dm_hs_phy_%d", port_index + 1);
> + else
> + irq_name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "dm_hs_phy_irq");
> + if (!irq_name)
> + return -ENOMEM;
> +
> + irq = platform_get_irq_byname_optional(pdev, irq_name);
> if (irq > 0) {
> - ret = dwc3_qcom_request_irq(qcom, irq, "dp_hs_phy_irq");
> + ret = dwc3_qcom_request_irq(qcom, irq, irq_name);
> if (ret)
> return ret;
> - qcom->dp_hs_phy_irq = irq;
> + qcom->ports[port_index].dm_hs_phy_irq = irq;
> }
>
> - irq = platform_get_irq_byname_optional(pdev, "dm_hs_phy_irq");
> + if (is_multiport)
> + irq_name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "ss_phy_%d", port_index + 1);
> + else
> + irq_name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "ss_phy_irq");
> + if (!irq_name)
> + return -ENOMEM;
> +
> + irq = platform_get_irq_byname_optional(pdev, irq_name);
> if (irq > 0) {
> - ret = dwc3_qcom_request_irq(qcom, irq, "dm_hs_phy_irq");
> + ret = dwc3_qcom_request_irq(qcom, irq, irq_name);
> if (ret)
> return ret;
> - qcom->dm_hs_phy_irq = irq;
> + qcom->ports[port_index].ss_phy_irq = irq;
> }
>
> - irq = platform_get_irq_byname_optional(pdev, "ss_phy_irq");
> + if (is_multiport)
> + return 0;
> +
> + irq = platform_get_irq_byname_optional(pdev, "qusb2_phy");
> if (irq > 0) {
> - ret = dwc3_qcom_request_irq(qcom, irq, "ss_phy_irq");
> + ret = dwc3_qcom_request_irq(qcom, irq, "qusb2_phy");
> + if (ret)
> + return ret;
> + qcom->ports[port_index].qusb2_phy_irq = irq;
> + }
> +
> + return 0;
> +}
> +
> +static int dwc3_qcom_find_num_ports(struct platform_device *pdev)
> +{
> + char irq_name[14];
> + int port_num;
> + int irq;
> +
> + irq = platform_get_irq_byname_optional(pdev, "dp_hs_phy_1");
> + if (irq <= 0)
> + return 1;
> +
> + for (port_num = 2; port_num <= DWC3_QCOM_MAX_PORTS; port_num++) {
> + sprintf(irq_name, "dp_hs_phy_%d", port_num);
> +
> + irq = platform_get_irq_byname_optional(pdev, irq_name);
> + if (irq <= 0)
> + return port_num - 1;
> + }
> +
> + return DWC3_QCOM_MAX_PORTS;
> +}
> +
> +static int dwc3_qcom_setup_irq(struct platform_device *pdev)
> +{
> + struct dwc3_qcom *qcom = platform_get_drvdata(pdev);
> + bool is_multiport;
> + int ret;
> + int i;
> +
> + qcom->num_ports = dwc3_qcom_find_num_ports(pdev);
> + is_multiport = (qcom->num_ports > 1);
> +
> + for (i = 0; i < qcom->num_ports; i++) {
> + ret = dwc3_qcom_setup_port_irq(pdev, i, is_multiport);
> if (ret)
> return ret;
> - qcom->ss_phy_irq = irq;
> }
>
> return 0;
> --
> 2.34.1
>

Acked-by: Thinh Nguyen <Thinh.Nguyen@xxxxxxxxxxxx>

Thanks,
Thinh