[PATCH v2 1/2] arm64: dts: exynos: gs101: add USB & USB-phy nodes

[André Draszik]

Add the USB 3.1 Dual Role Device (DRD) controller and USB-PHY nodes for
Google Tensor GS101.

The USB 3.1 DRD controller has the following features:
* compliant with both USB device 3.1 and USB device 2.0 standards
* compliant with USB host 3.1 and USB host 2.0 standards
* supports USB device 3.1 and USB device 2.0 interfaces
* supports USB host 3.1 and USB host 2.0 interfaces
* full-speed (12 Mbps) and high-speed (480 Mbps) modes with USB device
  2.0 interface
* super-speed (5 Gbps) mode with USB device 3.1 Gen1 interface
* super-speed plus (10 Gbps) mode with USB device 3.1 Gen2 interface
* single USB port which can be used for USB 3.1 or USB 2.0
* on-chip USB PHY transceiver
* DWC3 compatible
* supports up to 16 bi-directional endpoints
* compliant with xHCI 1.1 specification

Signed-off-by: André Draszik <andre.draszik@xxxxxxxxxx>

---
v2: fix commit message
---
 arch/arm64/boot/dts/exynos/google/gs101.dtsi | 41 ++++++++++++++++++++++++++++
 1 file changed, 41 insertions(+)

diff --git a/arch/arm64/boot/dts/exynos/google/gs101.dtsi b/arch/arm64/boot/dts/exynos/google/gs101.dtsi
index 9755a0bb70a1..217699477b32 100644
--- a/arch/arm64/boot/dts/exynos/google/gs101.dtsi
+++ b/arch/arm64/boot/dts/exynos/google/gs101.dtsi
@@ -1261,6 +1261,47 @@ cmu_hsi0: clock-controller@11000000 {
 				      "usbdpdbg";
 		};
 
+		usbdrd31_phy: phy@11100000 {
+			compatible = "google,gs101-usb31drd-phy";
+			reg = <0x11100000 0x0100>,
+			      <0x110f0000 0x0800>,
+			      <0x110e0000 0x2800>;
+			reg-names = "phy", "pcs", "pma";
+			clocks = <&cmu_hsi0 CLK_GOUT_HSI0_USB31DRD_ACLK_PHYCTRL>,
+				 <&cmu_hsi0 CLK_GOUT_HSI0_USB31DRD_I_USB20_PHY_REFCLK_26>,
+				 <&cmu_hsi0 CLK_GOUT_HSI0_UASC_HSI0_CTRL_ACLK>,
+				 <&cmu_hsi0 CLK_GOUT_HSI0_UASC_HSI0_CTRL_PCLK>,
+				 <&cmu_hsi0 CLK_GOUT_HSI0_USB31DRD_I_USBDPPHY_SCL_APB_PCLK>;
+			clock-names = "phy", "ref", "ctrl_aclk", "ctrl_pclk", "scl_pclk";
+			samsung,pmu-syscon = <&pmu_system_controller>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		usbdrd31: usb@11110000 {
+			compatible = "google,gs101-dwusb3";
+			clocks = <&cmu_hsi0 CLK_GOUT_HSI0_USB31DRD_BUS_CLK_EARLY>,
+				<&cmu_hsi0 CLK_GOUT_HSI0_USB31DRD_I_USB31DRD_SUSPEND_CLK_26>,
+				<&cmu_hsi0 CLK_GOUT_HSI0_UASC_HSI0_LINK_ACLK>,
+				<&cmu_hsi0 CLK_GOUT_HSI0_UASC_HSI0_LINK_PCLK>;
+			clock-names = "bus_early", "susp_clk", "link_aclk", "link_pclk";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x11110000 0x10000>;
+			status = "disabled";
+
+			usbdrd31_dwc3: usb@0 {
+				compatible = "snps,dwc3";
+				clocks = <&cmu_hsi0 CLK_GOUT_HSI0_USB31DRD_I_USB31DRD_REF_CLK_40>;
+				clock-names = "ref";
+				reg = <0x0 0x10000>;
+				interrupts = <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH 0>;
+				phys = <&usbdrd31_phy 0>, <&usbdrd31_phy 1>;
+				phy-names = "usb2-phy", "usb3-phy";
+				status = "disabled";
+			};
+		};
+
 		pinctrl_hsi1: pinctrl@11840000 {
 			compatible = "google,gs101-pinctrl";
 			reg = <0x11840000 0x00001000>;

-- 
2.44.0.769.g3c40516874-goog