[PATCH] rtc: rx6110: Constify struct regmap_config

[Christophe JAILLET]

'regmap_spi_config' and 'regmap_i2c_config' are not modified in this diver
and are only used as a const struct regmap_config.

Constifying these structures moves some data to a read-only section, so
increase overall security.

On a x86_64, with allmodconfig:
Before:
   text	   data	    bss	    dec	    hex	filename
   8896	   1554	     32	  10482	   28f2	drivers/rtc/rtc-rx6110.o

After:
   text	   data	    bss	    dec	    hex	filename
   9536	    914	     32	  10482	   28f2	drivers/rtc/rtc-rx6110.o

Signed-off-by: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
---
 drivers/rtc/rtc-rx6110.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/rtc/rtc-rx6110.c b/drivers/rtc/rtc-rx6110.c
index 834274db8c3f..af6dd6ccbe3b 100644
--- a/drivers/rtc/rtc-rx6110.c
+++ b/drivers/rtc/rtc-rx6110.c
@@ -330,7 +330,7 @@ static int rx6110_probe(struct rx6110_data *rx6110, struct device *dev)
 }
 
 #if IS_ENABLED(CONFIG_SPI_MASTER)
-static struct regmap_config regmap_spi_config = {
+static const struct regmap_config regmap_spi_config = {
 	.reg_bits = 8,
 	.val_bits = 8,
 	.max_register = RX6110_REG_IRQ,
@@ -410,7 +410,7 @@ static void rx6110_spi_unregister(void)
 #endif /* CONFIG_SPI_MASTER */
 
 #if IS_ENABLED(CONFIG_I2C)
-static struct regmap_config regmap_i2c_config = {
+static const struct regmap_config regmap_i2c_config = {
 	.reg_bits = 8,
 	.val_bits = 8,
 	.max_register = RX6110_REG_IRQ,
-- 
2.45.0