Re: [PATCH v7 5/6] dt-bindings: iio: adc: ad7192: Add AD7194 support
From: David Lechner
Date: Fri May 10 2024 - 10:22:38 EST
On 5/10/24 5:05 AM, Alisa-Dariana Roman wrote:
> On 30.04.2024 20:21, Conor Dooley wrote:
>> On Tue, Apr 30, 2024 at 07:29:45PM +0300, Alisa-Dariana Roman wrote:
>>> + diff-channels:
>>> + description:
>>> + Both inputs can be connected to pins AIN1 to AIN16 by choosing the
>>> + appropriate value from 1 to 16.
>>> + items:
>>> + minimum: 1
>>> + maximum: 16
>>> +
>>> + single-channel:
>>> + description:
>>> + Positive input can be connected to pins AIN1 to AIN16 by choosing the
>>> + appropriate value from 1 to 16. Negative input is connected to AINCOM.
>>> + items:
>>> + minimum: 1
>>> + maximum: 16
>>
>> Up to 16 differential channels and 16 single-ended channels, but only 16
>> pins? Would the number of differential channels not max out at 8?
>
> Hello, Conor! I really appreciate the feedback!
>
> The way I thought about it, the only thing constraining the number of channels is the reg number (minimum: 0, maximum: 271). 272 channels cover all possible combinations (16*16 differential and 16 single ended) and I thought there is no need for anything stricter. I added items: minimum:1 maximum:16 to make sure the numbers are from 1 to 16, corresponding to AIN1-AIN16.
>
> Please let me know what should be improved!
>
> Kind regards,
> Alisa-Dariana Roman.
>
Having looked at the datasheet for this and other similar chips, I agree
that this reasoning makes sense. Some of the similar chips that have fixed
channel assignments still have, e.g. a channel where + and - are both
AIN2 (I assume for diagnostics). So I think it makes sense to allow for
doing something similar here even if the most common use cases will
probably have at most 16 channels defined in the .dts.