Re: [PATCH] dmaengine: fsl-edma: change the memory access from local into remote mode in i.MX 8QM

[Frank Li]

On Fri, May 10, 2024 at 11:09:34AM +0800, Joy Zou wrote:
> Fix the issue where MEM_TO_MEM fail on i.MX8QM due to the requirement
> that both source and destination addresses need pass through the IOMMU.
> Typically, peripheral FIFO addresses bypass the IOMMU, necessitating
> only one of the source or destination to go through it.
> 
> Set "is_remote" to true to ensure both source and destination
> addresses pass through the IOMMU.
> 
> iMX8 Spec define "Local" and "Remote" bus as below.
> Local bus: bypass IOMMU to directly access other peripheral register,
> such as FIFO.
> Remote bus: go through IOMMU to access system memory.
> 
> The test fail log as follow:
> [ 66.268506] dmatest: dma0chan0-copy0: result #1: 'test timed out' with src_off=0x100 dst_off=0x80 len=0x3ec0 (0)
> [ 66.278785] dmatest: dma0chan0-copy0: summary 1 tests, 1 failures 0.32 iops 4 KB/s (0)
> 
> Fixes: 72f5801a4e2b ("dmaengine: fsl-edma: integrate v3 support")
> Signed-off-by: Joy Zou <joy.zou@xxxxxxx>

Reviewed-by: Frank Li <Frank.Li@xxxxxxx>

> Cc: stable@xxxxxxxxxxxxxxx
> ---
>  drivers/dma/fsl-edma-common.c | 3 +++
>  drivers/dma/fsl-edma-common.h | 1 +
>  drivers/dma/fsl-edma-main.c   | 2 +-
>  3 files changed, 5 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/dma/fsl-edma-common.c b/drivers/dma/fsl-edma-common.c
> index d62f5f452a43..7accee488856 100644
> --- a/drivers/dma/fsl-edma-common.c
> +++ b/drivers/dma/fsl-edma-common.c
> @@ -756,6 +756,8 @@ struct dma_async_tx_descriptor *fsl_edma_prep_memcpy(struct dma_chan *chan,
>  	fsl_desc->iscyclic = false;
>  
>  	fsl_chan->is_sw = true;
> +	if (fsl_edma_drvflags(fsl_chan) & FSL_EDMA_DRV_MEM_REMOTE)
> +		fsl_chan->is_remote = true;
>  
>  	/* To match with copy_align and max_seg_size so 1 tcd is enough */
>  	fsl_edma_fill_tcd(fsl_chan, fsl_desc->tcd[0].vtcd, dma_src, dma_dst,
> @@ -835,6 +837,7 @@ void fsl_edma_free_chan_resources(struct dma_chan *chan)
>  	fsl_chan->tcd_pool = NULL;
>  	fsl_chan->is_sw = false;
>  	fsl_chan->srcid = 0;
> +	fsl_chan->is_remote = false;
>  	if (fsl_edma_drvflags(fsl_chan) & FSL_EDMA_DRV_HAS_CHCLK)
>  		clk_disable_unprepare(fsl_chan->clk);
>  }
> diff --git a/drivers/dma/fsl-edma-common.h b/drivers/dma/fsl-edma-common.h
> index 3f93ebb890b3..cc15c1a145eb 100644
> --- a/drivers/dma/fsl-edma-common.h
> +++ b/drivers/dma/fsl-edma-common.h
> @@ -194,6 +194,7 @@ struct fsl_edma_desc {
>  #define FSL_EDMA_DRV_HAS_PD		BIT(5)
>  #define FSL_EDMA_DRV_HAS_CHCLK		BIT(6)
>  #define FSL_EDMA_DRV_HAS_CHMUX		BIT(7)
> +#define FSL_EDMA_DRV_MEM_REMOTE		BIT(8)
>  /* control and status register is in tcd address space, edma3 reg layout */
>  #define FSL_EDMA_DRV_SPLIT_REG		BIT(9)
>  #define FSL_EDMA_DRV_BUS_8BYTE		BIT(10)
> diff --git a/drivers/dma/fsl-edma-main.c b/drivers/dma/fsl-edma-main.c
> index 391e4f13dfeb..43d84cfefbe2 100644
> --- a/drivers/dma/fsl-edma-main.c
> +++ b/drivers/dma/fsl-edma-main.c
> @@ -342,7 +342,7 @@ static struct fsl_edma_drvdata imx7ulp_data = {
>  };
>  
>  static struct fsl_edma_drvdata imx8qm_data = {
> -	.flags = FSL_EDMA_DRV_HAS_PD | FSL_EDMA_DRV_EDMA3,
> +	.flags = FSL_EDMA_DRV_HAS_PD | FSL_EDMA_DRV_EDMA3 | FSL_EDMA_DRV_MEM_REMOTE,
>  	.chreg_space_sz = 0x10000,
>  	.chreg_off = 0x10000,
>  	.setup_irq = fsl_edma3_irq_init,
> -- 
> 2.37.1
>