[PATCH v4 4/9] arm64: dts: qcom: sm8250: add a link between DWC3 and QMP PHY
From: Dmitry Baryshkov
Date: Sat May 11 2024 - 18:05:06 EST
The SuperSpeed signals originate from the DWC3 host controller and then
are routed through the Combo QMP PHY, where they are multiplexed with
the DisplayPort signals. Add corresponding OF graph link.
Reported-by: Luca Weiss <luca.weiss@xxxxxxxxxxxxx>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sm8250.dtsi | 24 ++++++++++++++++++++++--
1 file changed, 22 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 0ec473ceb3d2..d6c8c6c2eced 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -3947,6 +3947,10 @@ port@0 {
port@1 {
reg = <1>;
+
+ usb_1_qmpphy_usb_ss_in: endpoint {
+ remote-endpoint = <&usb_1_dwc3_ss_out>;
+ };
};
port@2 {
@@ -4225,8 +4229,24 @@ usb_1_dwc3: usb@a600000 {
phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
phy-names = "usb2-phy", "usb3-phy";
- port {
- usb_1_dwc3_hs_out: endpoint {};
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ usb_1_dwc3_hs_out: endpoint {
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ usb_1_dwc3_ss_out: endpoint {
+ remote-endpoint = <&usb_1_qmpphy_usb_ss_in>;
+ };
+ };
};
};
};
--
2.39.2