Re:Re: Re: [PATCH] bus: mhi: host: Add Foxconn SDX72 related support

[Slark Xiao]

At 2024-05-15 15:41:19, "Manivannan Sadhasivam" <manivannan.sadhasivam@xxxxxxxxxx> wrote:
>+ Qiang
>
>On Wed, May 15, 2024 at 09:29:20AM +0800, Slark Xiao wrote:
>> At 2024-05-14 22:37:41, "Manivannan Sadhasivam" <manivannan.sadhasivam@xxxxxxxxxx> wrote:
>> >On Fri, May 10, 2024 at 11:26:57AM +0800, Slark Xiao wrote:
>> >> Align with Qcom SDX72, add ready timeout item for Foxconn SDX72.
>> >> And also, add firehose support since SDX72.
>> >> 
>> >> Signed-off-by: Slark Xiao <slark_xiao@xxxxxxx>
>> >> ---
>> >>  drivers/bus/mhi/host/pci_generic.c | 31 ++++++++++++++++++++++++++++++
>> >>  1 file changed, 31 insertions(+)
>> >> 
>> >> diff --git a/drivers/bus/mhi/host/pci_generic.c b/drivers/bus/mhi/host/pci_generic.c
>> >> index 08844ee79654..0fd94c193fc6 100644
>> >> --- a/drivers/bus/mhi/host/pci_generic.c
>> >> +++ b/drivers/bus/mhi/host/pci_generic.c
>> >> @@ -399,6 +399,8 @@ static const struct mhi_channel_config mhi_foxconn_sdx55_channels[] = {
>> >>  	MHI_CHANNEL_CONFIG_DL(13, "MBIM", 32, 0),
>> >>  	MHI_CHANNEL_CONFIG_UL(32, "DUN", 32, 0),
>> >>  	MHI_CHANNEL_CONFIG_DL(33, "DUN", 32, 0),
>> >> +	MHI_CHANNEL_CONFIG_UL_FP(34, "FIREHOSE", 32, 0),
>> >> +	MHI_CHANNEL_CONFIG_DL_FP(35, "FIREHOSE", 32, 0),
>> >
>> >This means SDX55 is also supporting FIREHOSE channels, which is not true I
>> >believe.
>> Actually, I just verified it with my sdx55 and the answer is Yes. These channels
>> are common settings for Qcom device which support PCIe mode. BTW, the
>> default settings of Qcom and Quectel support firehose for their sdx55 products.
>
>Qiang, can you please confirm that SDX55 supports FIREHOSE channels?
>
>> >
>> >>  	MHI_CHANNEL_CONFIG_HW_UL(100, "IP_HW0_MBIM", 128, 2),
>> >>  	MHI_CHANNEL_CONFIG_HW_DL(101, "IP_HW0_MBIM", 128, 3),
>> >>  };
>> >> @@ -419,6 +421,16 @@ static const struct mhi_controller_config modem_foxconn_sdx55_config = {
>> >>  	.event_cfg = mhi_foxconn_sdx55_events,
>> >>  };
>> >>  
>> >> +static const struct mhi_controller_config modem_foxconn_sdx72_config = {
>> >> +	.max_channels = 128,
>> >> +	.timeout_ms = 20000,
>> >> +	.ready_timeout_ms = 50000,
>> >> +	.num_channels = ARRAY_SIZE(mhi_foxconn_sdx55_channels),
>> >> +	.ch_cfg = mhi_foxconn_sdx55_channels,
>> >> +	.num_events = ARRAY_SIZE(mhi_foxconn_sdx55_events),
>> >> +	.event_cfg = mhi_foxconn_sdx55_events,
>> >> +};
>> >> +
>> >>  static const struct mhi_pci_dev_info mhi_foxconn_sdx24_info = {
>> >>  	.name = "foxconn-sdx24",
>> >>  	.config = &modem_foxconn_sdx55_config,
>> >> @@ -448,6 +460,16 @@ static const struct mhi_pci_dev_info mhi_foxconn_sdx65_info = {
>> >>  	.sideband_wake = false,
>> >>  };
>> >>  
>> >> +static const struct mhi_pci_dev_info mhi_foxconn_sdx72_info = {
>> >> +	.name = "foxconn-sdx72",
>> >> +	.edl = "qcom/sdx72m/xbl_s_devprg_ns.melf",
>> >
>> >What is '.melf'? Is the firmware available somewhere? Did you plan to upstream
>> >it to linux-firmware?
>> >
>> This file similar with "edl.mbn". In SDX72 product, the default "edl" file name is
>> "xbl_s_devprg_ns.melf". Currently we don't plan to upstream it to linux-firmware
>> since 2 reasons: 1: we share the same fold name sdx72m with qcom or other vendors
>> 2: this file may be changed since sdx72 product still under developing in our side. we
>> may change the base line according to QCOM release.
>
>Then I would ask you to add support when you have a stable firmware. I do not
>want to change the firmware name after some time as it will confuse users.
>
>- Mani
If a stable firmware must be provided, I think I shall change the folder name from qcom to
fox, do you agree this?
BTW, I need to check if it works after updating 'edl fw' from  xbl_s_devprg_ns.melf to
edl.mbn. 
>
>-- 
>மணிவண்ணன் சதாசிவம்