Re: [PATCH v2] Input: elantech - fix touchpad state on resume for Lenovo N24

From: Dmitry Torokhov
Date: Wed May 15 2024 - 18:28:40 EST


On Wed, May 15, 2024 at 10:29:58AM -0500, Jonathan Denose wrote:
> On Fri, May 3, 2024 at 11:12 AM Jonathan Denose <jdenose@xxxxxxxxxx> wrote:
> >
> > The Lenovo N24 on resume becomes stuck in a state where it
> > sends incorrect packets, causing elantech_packet_check_v4 to fail.
> > The only way for the device to resume sending the correct packets is for
> > it to be disabled and then re-enabled.
> >
> > This change adds a dmi check to trigger this behavior on resume.
> > Signed-off-by: Jonathan Denose <jdenose@xxxxxxxxxx>
> > ---
> >
> > Changes in v2:
> > - change ps2_sendbyte() calls to ps2_command()
> >
> > drivers/input/mouse/elantech.c | 33 +++++++++++++++++++++++++++++++++
> > 1 file changed, 33 insertions(+)
> >
> > diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c
> > index 4e38229404b4b..18f26315cae25 100644
> > --- a/drivers/input/mouse/elantech.c
> > +++ b/drivers/input/mouse/elantech.c
> > @@ -1476,6 +1476,23 @@ static void elantech_disconnect(struct psmouse *psmouse)
> > psmouse->private = NULL;
> > }
> >
> > +/*
> > + * Some hw_version 4 models fail to properly activate absolute mode on
> > + * resume without going through disable/enable cycle.
> > + */
> > +static const struct dmi_system_id elantech_needs_reenable[] = {
> > +#if defined(CONFIG_DMI) && defined(CONFIG_X86)
> > + {
> > + /* Lenovo N24 */
> > + .matches = {
> > + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
> > + DMI_MATCH(DMI_PRODUCT_NAME, "81AF"),
> > + },
> > + },
> > +#endif
> > + { }
> > +};
> > +
> > /*
> > * Put the touchpad back into absolute mode when reconnecting
> > */
> > @@ -1486,6 +1503,22 @@ static int elantech_reconnect(struct psmouse *psmouse)
> > if (elantech_detect(psmouse, 0))
> > return -1;
> >
> > + if (dmi_check_system(elantech_needs_reenable)) {
> > + int err;
> > +
> > + err = ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_DISABLE);
> > +
> > + if (err)
> > + psmouse_warn(psmouse, "Failed to deactivate mouse on %s: %d\n",
> > + psmouse->ps2dev.serio->phys, err);
> > +
> > + err = ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_ENABLE);
> > +
> > + if (err)
> > + psmouse_warn(psmouse, "Failed to reactivate mouse on %s: %d\n",
> > + psmouse->ps2dev.serio->phys, err);
> > + }
> > +
> > if (elantech_set_absolute_mode(psmouse)) {
> > psmouse_err(psmouse,
> > "failed to put touchpad back into absolute mode.\n");
> > --
> > 2.45.0.rc1.225.g2a3ae87e7f-goog
> >
>
> Hello,
>
> Is there anything else needed from me?

Josh, Jingle, do you have any feedback on this patch?

Thanks.

--
Dmitry