[PATCH net v1 1/1] net: dsa: microchip: Correct initialization order for KSZ88x3 ports

[Hariprasad Kelam]

> Adjust the initialization sequence of KSZ88x3 switches to enable 802.1p
> priority control on Port 2 before configuring Port 1. This change ensures the
> apptrust functionality on Port 1 operates correctly, as it depends on the
> priority settings of Port 2. The prior initialization sequence incorrectly
> configured Port 1 first, which could lead to functional discrepancies.
> 
> Fixes: a1ea57710c9d ("net: dsa: microchip: dcb: add special handling for
> KSZ88X3 family")
> Signed-off-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
> ---
>  drivers/net/dsa/microchip/ksz_dcb.c | 13 +++++++++++++
>  1 file changed, 13 insertions(+)
> 
> diff --git a/drivers/net/dsa/microchip/ksz_dcb.c
> b/drivers/net/dsa/microchip/ksz_dcb.c
> index a971063275629..19b228b849247 100644
> --- a/drivers/net/dsa/microchip/ksz_dcb.c
> +++ b/drivers/net/dsa/microchip/ksz_dcb.c
> @@ -805,5 +805,18 @@ int ksz_dcb_init(struct ksz_device *dev)
>  	if (ret)
>  		return ret;
> 
> +	/* Enable 802.1p priority control on Port 2 during switch initialization.
> +	 * This setup is critical for the apptrust functionality on Port 1, which
> +	 * relies on the priority settings of Port 2. Note: Port 1 is naturally
> +	 * configured before Port 2, necessitating this configuration order.
> +	 */
> +	if (ksz_is_ksz88x3(dev)) {
> +		ret = ksz_prmw8(dev, KSZ_PORT_2,
Nit :  instead, just call return ksz_prmw8();
Reviewed-by: Hariprasad Kelam <hkelam@xxxxxxxxxxx>



> KSZ8_REG_PORT_1_CTRL_0,
> +				KSZ8_PORT_802_1P_ENABLE,
> +				KSZ8_PORT_802_1P_ENABLE);
> +		if (ret)
> +			return ret;

Thanks,
Hariprasad k
> +	}
> +
>  	return 0;
>  }
> --
> 2.39.2
>