[PATCH 1/2] regulator: rtq2208: Add fixed LDO VOUT property and check that matches the constraints

[Alina Yu]

A fixed LDO VOUT property has been added to specify the fixed_uV of the regulator_desc.
Additionally, a check has been included in this version
to ensure that the fixed_uV matches the constraints.

Signed-off-by: Alina Yu <alina_yu@xxxxxxxxxxx>
---
 drivers/regulator/rtq2208-regulator.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/drivers/regulator/rtq2208-regulator.c b/drivers/regulator/rtq2208-regulator.c
index 39147d6..c2c1689 100644
--- a/drivers/regulator/rtq2208-regulator.c
+++ b/drivers/regulator/rtq2208-regulator.c
@@ -377,6 +377,7 @@ static int rtq2208_of_get_ldo_dvs_ability(struct device *dev)
 	struct of_regulator_match *match;
 	struct regulator_desc *desc;
 	struct regulator_init_data *init_data;
+	u32 fixed_uV;
 	int ret, i;
 
 	if (!dev->of_node)
@@ -401,9 +402,15 @@ static int rtq2208_of_get_ldo_dvs_ability(struct device *dev)
 		if (!init_data || !desc)
 			continue;
 
-		if (init_data->constraints.min_uV == init_data->constraints.max_uV) {
+		/* specify working fixed voltage if the propery exists */
+		ret = of_property_read_u32(match->of_node, "richtek,fixed-microvolt", &fixed_uV);
+
+		if (!ret) {
+			if (fixed_uV != init_data->constraints.min_uV ||
+				fixed_uV != init_data->constraints.max_uV)
+				return -EINVAL;
 			desc->n_voltages = 1;
-			desc->fixed_uV = init_data->constraints.min_uV;
+			desc->fixed_uV = fixed_uV;
 			desc->ops = &rtq2208_regulator_ldo_fix_ops;
 		} else {
 			desc->n_voltages = ARRAY_SIZE(rtq2208_ldo_volt_table);
-- 
2.7.4