[PATCH net v2] net: lan966x: Remove ptp traps in case the ptp is not enabled.

From: Horatiu Vultur
Date: Fri May 17 2024 - 09:58:30 EST


Lan966x is adding ptp traps to redirect the ptp frames to the CPU such
that the HW will not forward these frames anywhere. The issue is that in
case ptp is not enabled and the timestamping source is et to
HWTSTAMP_SOURCE_NETDEV then these traps would not be removed on the
error path.
Fix this by removing the traps in this case as they are not needed.

Fixes: 54e1ed69c40a ("net: lan966x: convert to ndo_hwtstamp_get() and ndo_hwtstamp_set()")
Suggested-by: Vladimir Oltean <vladimir.oltean@xxxxxxx>
Reviewed-by: Vladimir Oltean <vladimir.oltean@xxxxxxx>
Signed-off-by: Horatiu Vultur <horatiu.vultur@xxxxxxxxxxxxx>
---
v1->v2:
- as suggested by Vladimir, add the check before programming the traps
in the first place
---
drivers/net/ethernet/microchip/lan966x/lan966x_main.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/net/ethernet/microchip/lan966x/lan966x_main.c b/drivers/net/ethernet/microchip/lan966x/lan966x_main.c
index 2635ef8958c80..fbff37067ab78 100644
--- a/drivers/net/ethernet/microchip/lan966x/lan966x_main.c
+++ b/drivers/net/ethernet/microchip/lan966x/lan966x_main.c
@@ -474,14 +474,14 @@ static int lan966x_port_hwtstamp_set(struct net_device *dev,
cfg->source != HWTSTAMP_SOURCE_PHYLIB)
return -EOPNOTSUPP;

+ if (cfg->source == HWTSTAMP_SOURCE_NETDEV && !port->lan966x->ptp)
+ return -EOPNOTSUPP;
+
err = lan966x_ptp_setup_traps(port, cfg);
if (err)
return err;

if (cfg->source == HWTSTAMP_SOURCE_NETDEV) {
- if (!port->lan966x->ptp)
- return -EOPNOTSUPP;
-
err = lan966x_ptp_hwtstamp_set(port, cfg, extack);
if (err) {
lan966x_ptp_del_traps(port);
--
2.34.1