[PATCH] i2c: ocores: set IACK bit after core is enabled

[Grygorii Tertychnyi]

Setting IACK bit when core is disabled does not clear the "Interrupt Flag"
bit in the status register, and the interrupt remains pending.

Sometimes it causes failure for the very first message transfer, that is
usually a device probe.

Hence, set IACK bit after core is enabled to clear pending interrupt.

Signed-off-by: Grygorii Tertychnyi <grygorii.tertychnyi@xxxxxxxxxxxxxxxxxxxx>
---
 drivers/i2c/busses/i2c-ocores.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c
index a0af027db04c..a52f8fd4e2fe 100644
--- a/drivers/i2c/busses/i2c-ocores.c
+++ b/drivers/i2c/busses/i2c-ocores.c
@@ -439,8 +439,8 @@ static int ocores_init(struct device *dev, struct ocores_i2c *i2c)
 	oc_setreg(i2c, OCI2C_PREHIGH, prescale >> 8);

 	/* Init the device */
-	oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_IACK);
 	oc_setreg(i2c, OCI2C_CONTROL, ctrl | OCI2C_CTRL_EN);
+	oc_setreg(i2c, OCI2C_CMD, OCI2C_CMD_IACK);

 	return 0;
 }
--
2.43.0