Re: [PATCH v8 2/6] dt-bindings: iio: adc: ad7192: Add aincom supply

[Jonathan Cameron]

On Tue, 14 May 2024 15:02:18 +0300
Alisa-Dariana Roman <alisadariana@xxxxxxxxx> wrote:

> AINCOM should actually be a supply. AINx inputs are referenced to AINCOM
> in pseudo-differential operation mode. AINCOM voltage represents the
> offset of corresponding channels.
> 
> Reviewed-by: Rob Herring (Arm) <robh@xxxxxxxxxx>
> Signed-off-by: Alisa-Dariana Roman <alisa.roman@xxxxxxxxxx>

Whilst I'm not sure we've totally bottomed out on how to describe
all combinations of pseudo-differential this seem reasonable for this
particular device and harmless against any proposals we have had so far.

Hence applied.


Jonathan
> ---
>  Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
> index 16def2985ab4..cf5c568f140a 100644
> --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7192.yaml
> @@ -41,6 +41,11 @@ properties:
>    interrupts:
>      maxItems: 1
>  
> +  aincom-supply:
> +    description: |
> +      AINCOM voltage supply. Analog inputs AINx are referenced to this input
> +      when configured for pseudo-differential operation.
> +
>    dvdd-supply:
>      description: DVdd voltage supply
>  
> @@ -117,6 +122,7 @@ examples:
>              clock-names = "mclk";
>              interrupts = <25 0x2>;
>              interrupt-parent = <&gpio>;
> +            aincom-supply = <&aincom>;
>              dvdd-supply = <&dvdd>;
>              avdd-supply = <&avdd>;
>              vref-supply = <&vref>;