[PATCH v4 01/10] dt-bindings: display: Add YAML schema for JH7110 display pipeline
From: keith
Date: Mon May 20 2024 - 23:31:08 EST
JH7110 SoC display pipeline includes a display controller and hdmi.
Dc controller IP : Vivante DC8200 Dual Display
HDMI IP : INNOSILICON HDMI2.0
As the INNO hdmi ip is also used by rockchip SoC in the driver code,
the innosilicon,inno-hdmi.yaml schema containing the common properties
for the INNO DesignWare HDMI TX controller isn't a full device
tree binding specification, but is meant to be referenced by
platform-specific bindings for the IP core.
Signed-off-by: keith <keith.zhao@xxxxxxxxxxxxxxxx>
---
.../display/bridge/innosilicon,inno-hdmi.yaml | 49 +++++
.../display/rockchip/rockchip,inno-hdmi.yaml | 27 +--
.../starfive/starfive,dsi-encoder.yaml | 92 ++++++++++
.../starfive/starfive,jh7110-dc8200.yaml | 169 ++++++++++++++++++
.../starfive/starfive,jh7110-inno-hdmi.yaml | 75 ++++++++
.../soc/starfive/starfive,jh7110-syscon.yaml | 1 +
MAINTAINERS | 8 +
7 files changed, 396 insertions(+), 25 deletions(-)
create mode 100644 Documentation/devicetree/bindings/display/bridge/innosilicon,inno-hdmi.yaml
create mode 100644 Documentation/devicetree/bindings/display/starfive/starfive,dsi-encoder.yaml
create mode 100644 Documentation/devicetree/bindings/display/starfive/starfive,jh7110-dc8200.yaml
create mode 100644 Documentation/devicetree/bindings/display/starfive/starfive,jh7110-inno-hdmi.yaml
diff --git a/Documentation/devicetree/bindings/display/bridge/innosilicon,inno-hdmi.yaml b/Documentation/devicetree/bindings/display/bridge/innosilicon,inno-hdmi.yaml
new file mode 100644
index 000000000000..8540174dcaeb
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/innosilicon,inno-hdmi.yaml
@@ -0,0 +1,49 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/bridge/innosilicon,inno-hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common Properties for Innosilicon HDMI TX IP
+
+maintainers:
+ - Keith Zhao <keith.zhao@xxxxxxxxxxxxxxxx>
+
+description: |
+ This document defines device tree properties for the Innosilicon HDMI TX
+ controller (INNO HDMI) IP core. It doesn't constitute a full device tree
+ binding specification by itself but is meant to be referenced by device tree
+ bindings for the platform-specific integrations of the INNO HDMI.
+
+ When referenced from platform device tree bindings the properties defined in
+ this document are defined as follows. The platform device tree bindings are
+ responsible for defining whether each property is required or optional.
+
+properties:
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Port node with one endpoint connected to a display controller node.
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Port node with one endpoint connected to a hdmi-connector node.
+
+ required:
+ - port@0
+ - port@1
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,inno-hdmi.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,inno-hdmi.yaml
index 5b87b0f1963e..589dedfcbee0 100644
--- a/Documentation/devicetree/bindings/display/rockchip/rockchip,inno-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,inno-hdmi.yaml
@@ -16,12 +16,6 @@ properties:
- rockchip,rk3036-inno-hdmi
- rockchip,rk3128-inno-hdmi
- reg:
- maxItems: 1
-
- interrupts:
- maxItems: 1
-
clocks:
minItems: 1
items:
@@ -40,24 +34,6 @@ properties:
"#sound-dai-cells":
const: 0
- ports:
- $ref: /schemas/graph.yaml#/properties/ports
-
- properties:
- port@0:
- $ref: /schemas/graph.yaml#/properties/port
- description:
- Port node with one endpoint connected to a vop node.
-
- port@1:
- $ref: /schemas/graph.yaml#/properties/port
- description:
- Port node with one endpoint connected to a hdmi-connector node.
-
- required:
- - port@0
- - port@1
-
required:
- compatible
- reg
@@ -69,6 +45,7 @@ required:
- ports
allOf:
+ - $ref: ../bridge/innosilicon,inno-hdmi.yaml#
- $ref: /schemas/sound/dai-common.yaml#
- if:
properties:
@@ -95,7 +72,7 @@ allOf:
required:
- power-domains
-additionalProperties: false
+unevaluatedProperties: false
examples:
- |
diff --git a/Documentation/devicetree/bindings/display/starfive/starfive,dsi-encoder.yaml b/Documentation/devicetree/bindings/display/starfive/starfive,dsi-encoder.yaml
new file mode 100644
index 000000000000..07aa147a9db1
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/starfive/starfive,dsi-encoder.yaml
@@ -0,0 +1,92 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/starfive/starfive,dsi-encoder.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: starfive jh7110 SoC Encoder
+
+maintainers:
+ - Keith Zhao <keith.zhao@xxxxxxxxxxxxxxxx>
+
+description:
+ Device-Tree bindings for simple encoder.
+ Simple encoder driver only has basic functionality.
+ the hardware of dc8200 has 2 output interface, and uses
+ syscon to select which one to be used.
+
+properties:
+ compatible:
+ const: starfive,dsi-encoder
+
+ starfive,syscon:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ items:
+ - items:
+ - description: phandle to syscon that select crtc output.
+ - description: Offset of crtc selection
+ - description: Shift of crtc selection
+ description:
+ A phandle to syscon with two arguments that configure select output.
+ The argument one is the offset of crtc selection, the
+ argument two is the shift of crtc selection.
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ The first port should be the input coming from the associated dc channel.
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ The second port should be the output coming from the associated bridge.
+
+ required:
+ - port@0
+ - port@1
+
+required:
+ - compatible
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ dssctrl: dssctrl@295b0000 {
+ compatible = "starfive,jh7110-vout-syscon", "syscon";
+ reg = <0x295b0000 0x90>;
+ };
+
+ dsi_encoder: dsi_encoder {
+ compatible = "starfive,dsi-encoder";
+ starfive,syscon = <&dssctrl 0x8 0x12>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ /* input */
+ port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ dsi_input0:endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&dc_out_dpi1>;
+ };
+ };
+ /* output */
+ port@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ dsi_out:endpoint {
+ remote-endpoint = <&mipi_in>;
+ };
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/display/starfive/starfive,jh7110-dc8200.yaml b/Documentation/devicetree/bindings/display/starfive/starfive,jh7110-dc8200.yaml
new file mode 100644
index 000000000000..a28dfdd471b6
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/starfive/starfive,jh7110-dc8200.yaml
@@ -0,0 +1,169 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/starfive/starfive,jh7110-dc8200.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STARFIVE JH7110 SoC display controller
+
+description:
+ The STARFIVE JH7110 SoC uses the display controller based on Verisilicon IP(DC8200)
+ to transfer the image data from a video memory buffer to an external LCD interface.
+
+ pipe0 binds HDMI for primary display,
+ pipe1 binds DSI for external display.
+
+ +------------------------------+
+ | |
+ | |
+ +----+ | +-------------------+ | +-------+ +------+ +------+
+ | +----->+ dc controller 0 +--->----->+HDMICtl| ->+ PHY +-->+PANEL0+
+ |AXI | | +-------------------+ | +-------+ +------+ +------+
+ | | | |
+ | | | |
+ | | | |
+ | | | |
+ |APB | | +-------------------+ +---------+ +------+ +-------+
+ | +----->+ dc controller 1 +--->---->+ dsiTx +--->+DPHY +->+ PANEL1+
+ | | | +-------------------+ +---------+ +------+ +-------+
+ +----+ | |
+ +------------------------------+
+
+maintainers:
+ - Keith Zhao <keith.zhao@xxxxxxxxxxxxxxxx>
+
+properties:
+ compatible:
+ const: starfive,jh7110-dc8200
+
+ reg:
+ items:
+ - description: host interface address and length
+ - description: display physical base address and length
+
+ reg-names:
+ items:
+ - const: host
+ - const: base
+
+ clocks:
+ items:
+ - description: Clock for display system noc bus.
+ - description: Core clock for display controller.
+ - description: Clock for axi bus to access ddr.
+ - description: Clock for ahb bus to R/W the phy regs.
+ - description: Pixel clock for display channel 0.
+ - description: Pixel clock for display channel 1.
+ - description: Pixel clock from hdmi.
+ - description: Pixel clock for soc .
+
+ clock-names:
+ items:
+ - const: noc_bus
+ - const: dc_core
+ - const: axi_core
+ - const: ahb
+ - const: channel0
+ - const: channel1
+ - const: hdmi_tx
+ - const: dc_parent
+
+ resets:
+ items:
+ - description: Reset for axi bus.
+ - description: Reset for ahb bus.
+ - description: Core reset of display controller.
+
+ reset-names:
+ items:
+ - const: axi
+ - const: ahb
+ - const: core
+
+ interrupts:
+ items:
+ - description: The interrupt will be generated when DC finish one frame
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ properties:
+ port@0:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ channel 0 output
+
+ port@1:
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ channel 1 output
+
+ required:
+ - port@0
+ - port@1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/starfive,jh7110-crg.h>
+ #include <dt-bindings/reset/starfive,jh7110-crg.h>
+ dc8200: lcd-controller@29400000 {
+ compatible = "starfive,jh7110-dc8200";
+ reg = <0x29400000 0x100>,
+ <0x29400800 0x2000>;
+ reg-names = "host", "base";
+
+ interrupts = <95>;
+ clocks = <&syscrg JH7110_SYSCLK_NOC_BUS_DISP_AXI>,
+ <&voutcrg JH7110_VOUTCLK_DC8200_CORE>,
+ <&voutcrg JH7110_VOUTCLK_DC8200_AXI>,
+ <&voutcrg JH7110_VOUTCLK_DC8200_AHB>,
+ <&voutcrg JH7110_VOUTCLK_DC8200_PIX0>,
+ <&voutcrg JH7110_VOUTCLK_DC8200_PIX1>,
+ <&hdmitx0_pixelclk>,
+ <&voutcrg JH7110_VOUTCLK_DC8200_PIX>;
+ clock-names = "noc_bus", "dc_core", "axi_core", "ahb",
+ "channel0", "channel1", "hdmi_tx", "dc_parent";
+ resets = <&voutcrg JH7110_VOUTRST_DC8200_AXI>,
+ <&voutcrg JH7110_VOUTRST_DC8200_AHB>,
+ <&voutcrg JH7110_VOUTRST_DC8200_CORE>;
+ reset-names = "axi","ahb", "core";
+
+ crtc_out: ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dc_out0: port@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dc_out_dpi0: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&hdmi_enc>;
+ };
+
+ };
+
+ dc_out1: port@1 {
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dc_out_dpi1: endpoint@1 {
+ reg = <1>;
+ remote-endpoint = <&dsi_enc>;
+ };
+
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/display/starfive/starfive,jh7110-inno-hdmi.yaml b/Documentation/devicetree/bindings/display/starfive/starfive,jh7110-inno-hdmi.yaml
new file mode 100644
index 000000000000..bfd7dc41fc14
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/starfive/starfive,jh7110-inno-hdmi.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/starfive/starfive,jh7110-inno-hdmi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Starfive JH7110 Innosilicon HDMI controller
+
+maintainers:
+ - Keith Zhao <keith.zhao@xxxxxxxxxxxxxxxx>
+
+allOf:
+ - $ref: ../bridge/innosilicon,inno-hdmi.yaml#
+
+properties:
+ compatible:
+ const: "starfive,jh7110-inno-hdmi"
+
+ clocks:
+ items:
+ - description: System clock of HDMI module.
+ - description: Mclk clock of HDMI audio.
+ - description: Bclk clock of HDMI audio.
+
+ clock-names:
+ items:
+ - const: sysclk
+ - const: mclk
+ - const: bclk
+
+ resets:
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - resets
+ - ports
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/pinctrl/starfive,jh7110-pinctrl.h>
+ #include <dt-bindings/gpio/gpio.h>
+ hdmi: hdmi@29590000 {
+ compatible = "starfive,jh7110-inno-hdmi";
+ reg = <0x29590000 0x4000>;
+ interrupts = <99>;
+ clocks = <&voutcrg 17>, <&voutcrg 15>, <&voutcrg 16>;
+ clock-names = "sysclk", "mclk","bclk";
+ resets = <&voutcrg 9>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hdmi_in: port@0 {
+ reg = <0>;
+ hdmi_in_vop: endpoint {
+ remote-endpoint = <&dc_out_dpi0>;
+ };
+ };
+
+ hdmi_out: port@1 {
+ reg = <1>;
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml b/Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml
index 0039319e91fe..cf9b657d0e8a 100644
--- a/Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml
+++ b/Documentation/devicetree/bindings/soc/starfive/starfive,jh7110-syscon.yaml
@@ -24,6 +24,7 @@ properties:
- enum:
- starfive,jh7110-aon-syscon
- starfive,jh7110-stg-syscon
+ - starfive,jh7110-vout-syscon
- const: syscon
reg:
diff --git a/MAINTAINERS b/MAINTAINERS
index c675fc296b19..8881652bb8b6 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -7148,6 +7148,14 @@ T: git https://gitlab.freedesktop.org/drm/misc/kernel.git
F: Documentation/devicetree/bindings/display/ste,mcde.yaml
F: drivers/gpu/drm/mcde/
+DRM DRIVERS FOR STARFIVE
+M: Keith Zhao <keith.zhao@xxxxxxxxxxxxxxxx>
+L: dri-devel@xxxxxxxxxxxxxxxxxxxxx
+S: Maintained
+T: git https://gitlab.freedesktop.org/drm/misc/kernel.git
+F: Documentation/devicetree/bindings/display/bridge/innosilicon,inno-hdmi.yaml
+F: Documentation/devicetree/bindings/display/starfive/
+
DRM DRIVER FOR SYNAPTICS R63353 PANELS
M: Michael Trimarchi <michael@xxxxxxxxxxxxxxxxxxxx>
S: Maintained
--
2.27.0