[PATCH] net: phy: micrel: set soft_reset callback to genphy_soft_reset for KSZ8061

[Mathieu Othacehe]

Following a similar reinstate for the KSZ8081 and KSZ9031.

Older kernels would use the genphy_soft_reset if the PHY did not implement
a .soft_reset.

The KSZ8061 errata described here:
https://ww1.microchip.com/downloads/en/DeviceDoc/KSZ8061-Errata-DS80000688B.pdf
and worked around with 232ba3a51c ("net: phy: Micrel KSZ8061: link failure after cable connect")
is back again without this soft reset.

Fixes: 6e2d85ec0559 ("net: phy: Stop with excessive soft reset")
Tested-by: Karim Ben Houcine <karim.benhoucine@xxxxxxxxxxxxx>
Signed-off-by: Mathieu Othacehe <othacehe@xxxxxxx>
---
 drivers/net/phy/micrel.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 13e30ea7eec5..1d769322b059 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -5327,6 +5327,7 @@ static struct phy_driver ksphy_driver[] = {
 	/* PHY_BASIC_FEATURES */
 	.probe		= kszphy_probe,
 	.config_init	= ksz8061_config_init,
+	.soft_reset	= genphy_soft_reset,
 	.config_intr	= kszphy_config_intr,
 	.handle_interrupt = kszphy_handle_interrupt,
 	.suspend	= kszphy_suspend,
-- 
2.41.0