Re: [PATCH v4 4/4] arm64: dts: mediatek: mt8188: add default thermal zones

[AngeloGioacchino Del Regno]

Il 21/05/24 16:05, Julien Panis ha scritto:
> From: Nicolas Pitre <npitre@xxxxxxxxxxxx>
>
> Inspired by the vendor kernel but adapted to the upstream thermal
> driver version.
>
> Signed-off-by: Nicolas Pitre <npitre@xxxxxxxxxxxx>
> Signed-off-by: Julien Panis <jpanis@xxxxxxxxxxxx>
> ---
>   arch/arm64/boot/dts/mediatek/mt8188.dtsi | 432 +++++++++++++++++++++++++++++++
>   1 file changed, 432 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8188.dtsi b/arch/arm64/boot/dts/mediatek/mt8188.dtsi
> index a9f1b9db54a6..2b0f3e03acc1 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8188.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8188.dtsi
> @@ -12,6 +12,8 @@
>   #include <dt-bindings/pinctrl/mediatek,mt8188-pinfunc.h>
>   #include <dt-bindings/power/mediatek,mt8188-power.h>
>   #include <dt-bindings/reset/mt8188-resets.h>
> +#include <dt-bindings/thermal/thermal.h>
> +#include <dt-bindings/thermal/mediatek,lvts-thermal.h>
>   
>   / {
>   	compatible = "mediatek,mt8188";

.snip..

> +
> +		gpu1-thermal {

You forgot to implement my feedback to Nicolas - this must be gpu-thermal

> +			polling-delay = <1000>;
> +			polling-delay-passive = <250>;
> +			thermal-sensors = <&lvts_ap MT8188_AP_GPU1>;
> +
> +			trips {
> +				gpu1_alert0: trip-alert0 {
> +					temperature = <85000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
> +				gpu1_alert1: trip-alert1 {
> +					temperature = <95000>;
> +					hysteresis = <2000>;
> +					type = "hot";
> +				};
> +
> +				gpu1_crit: trip-crit {
> +					temperature = <100000>;
> +					hysteresis = <0>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +
> +		gpu2-thermal {

..and for consistency with the other SoCs, this must be gpu1-thermal.

> +			polling-delay = <1000>;
> +			polling-delay-passive = <250>;
> +			thermal-sensors = <&lvts_ap MT8188_AP_GPU2>;
> +
> +			trips {
> +				gpu2_alert0: trip-alert0 {
> +					temperature = <85000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};
> +
> +				gpu2_alert1: trip-alert1 {
> +					temperature = <95000>;
> +					hysteresis = <2000>;
> +					type = "hot";
> +				};
> +
> +				gpu2_crit: trip-crit {
> +					temperature = <100000>;
> +					hysteresis = <0>;
> +					type = "critical";
> +				};
> +			};
> +		};
> +
> +		soc1-thermal {

Any idea of what can "soc1" ever be? What measurement point is that?

VPU? IMG? INFRA?

soc1, soc2, soc3 make little sense.

Regards,
Angelo