[PATCH 16/17] Add Kconfig, Makefile and integrate into wireless/ti folder

[michael.nemanov]

From: Michael Nemanov <Michael.Nemanov@xxxxxx>

Signed-off-by: Michael Nemanov <michael.nemanov@xxxxxx>
---
 drivers/net/wireless/ti/Kconfig         |  1 +
 drivers/net/wireless/ti/Makefile        |  1 +
 drivers/net/wireless/ti/cc33xx/Kconfig  | 24 ++++++++++++++++++++++++
 drivers/net/wireless/ti/cc33xx/Makefile | 10 ++++++++++
 4 files changed, 36 insertions(+)
 create mode 100644 drivers/net/wireless/ti/cc33xx/Kconfig
 create mode 100644 drivers/net/wireless/ti/cc33xx/Makefile

diff --git a/drivers/net/wireless/ti/Kconfig b/drivers/net/wireless/ti/Kconfig
index 3fcd9e395f72..fa7214d6018c 100644
--- a/drivers/net/wireless/ti/Kconfig
+++ b/drivers/net/wireless/ti/Kconfig
@@ -14,6 +14,7 @@ if WLAN_VENDOR_TI
 source "drivers/net/wireless/ti/wl1251/Kconfig"
 source "drivers/net/wireless/ti/wl12xx/Kconfig"
 source "drivers/net/wireless/ti/wl18xx/Kconfig"
+source "drivers/net/wireless/ti/cc33xx/Kconfig"
 
 # keep last for automatic dependencies
 source "drivers/net/wireless/ti/wlcore/Kconfig"
diff --git a/drivers/net/wireless/ti/Makefile b/drivers/net/wireless/ti/Makefile
index 05ee016594f8..9e028a91ec30 100644
--- a/drivers/net/wireless/ti/Makefile
+++ b/drivers/net/wireless/ti/Makefile
@@ -3,3 +3,4 @@ obj-$(CONFIG_WLCORE)			+= wlcore/
 obj-$(CONFIG_WL12XX)			+= wl12xx/
 obj-$(CONFIG_WL1251)			+= wl1251/
 obj-$(CONFIG_WL18XX)			+= wl18xx/
+obj-$(CONFIG_CC33XX)			+= cc33xx/
\ No newline at end of file
diff --git a/drivers/net/wireless/ti/cc33xx/Kconfig b/drivers/net/wireless/ti/cc33xx/Kconfig
new file mode 100644
index 000000000000..0c3ff97dacc7
--- /dev/null
+++ b/drivers/net/wireless/ti/cc33xx/Kconfig
@@ -0,0 +1,24 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config CC33XX
+	tristate "TI CC33XX support"
+	depends on MAC80211
+	select FW_LOADER
+	help
+	  This module contains the main code for TI CC33XX WLAN chips. It abstracts
+	  hardware-specific differences among different chipset families.
+	  Each chipset family needs to implement its own lower-level module
+	  that will depend on this module for the common code.
+
+	  If you choose to build a module, it will be called cc33xx. Say N if
+	  unsure.
+
+config CC33XX_SDIO
+	tristate "TI CC33XX SDIO support"
+	depends on CC33XX && MMC
+	help
+	  This module adds support for the SDIO interface of adapters using
+	  TI CC33XX WLAN chipsets.  Select this if your platform is using
+	  the SDIO bus.
+
+	  If you choose to build a module, it'll be called cc33xx_sdio.
+	  Say N if unsure.
diff --git a/drivers/net/wireless/ti/cc33xx/Makefile b/drivers/net/wireless/ti/cc33xx/Makefile
new file mode 100644
index 000000000000..6156f778edee
--- /dev/null
+++ b/drivers/net/wireless/ti/cc33xx/Makefile
@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: GPL-2.0
+
+cc33xx-objs		= main.o cmd.o io.o event.o tx.o rx.o ps.o acx.o \
+					boot.o init.o scan.o
+
+cc33xx_sdio-objs	= sdio.o
+
+cc33xx-$(CONFIG_NL80211_TESTMODE)	+= testmode.o
+obj-$(CONFIG_CC33XX)				+= cc33xx.o
+obj-$(CONFIG_CC33XX_SDIO)			+= cc33xx_sdio.o
-- 
2.25.1