[PATCH RFC v3 7/9] arm64: boot: dts: qcom: Use phandles for thermal_zones

From: Elliot Berman
Date: Tue May 21 2024 - 14:43:01 EST

Next message: Linux regression tracking (Thorsten Leemhuis): "Re: [PATCH] gpiolib: acpi: Move ACPI device NULL check to acpi_can_fallback_to_crs()"
Previous message: Elliot Berman: "[PATCH RFC v3 4/9] dt-bindings: arm: qcom: Update Devicetree identifiers"
In reply to: Elliot Berman: "[PATCH RFC v3 4/9] dt-bindings: arm: qcom: Update Devicetree identifiers"
Next in thread: Dmitry Baryshkov: "Re: [PATCH RFC v3 0/9] dt-bindings: hwinfo: Introduce board-id"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

In preparation for converting sm8550 to use devicetree overlays, use
phandles for thermal_zones.

Signed-off-by: Elliot Berman <quic_eberman@xxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/pm8010.dtsi | 62 ++++++++--------
arch/arm64/boot/dts/qcom/pm8550.dtsi | 32 ++++----
arch/arm64/boot/dts/qcom/pm8550b.dtsi | 36 +++++----
arch/arm64/boot/dts/qcom/pm8550ve.dtsi | 38 +++++-----
arch/arm64/boot/dts/qcom/pm8550vs.dtsi | 128 ++++++++++++++++----------------
arch/arm64/boot/dts/qcom/pmr735d_a.dtsi | 38 +++++-----
arch/arm64/boot/dts/qcom/pmr735d_b.dtsi | 38 +++++-----
arch/arm64/boot/dts/qcom/sm8550.dtsi | 2 +-
arch/arm64/boot/dts/qcom/sm8650.dtsi | 2 +-
9 files changed, 181 insertions(+), 195 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/pm8010.dtsi b/arch/arm64/boot/dts/qcom/pm8010.dtsi
index 0ea641e12209..a889df2f2f25 100644
--- a/arch/arm64/boot/dts/qcom/pm8010.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8010.dtsi
@@ -6,47 +6,45 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>

-/ {
- thermal-zones {
- pm8010-m-thermal {
- polling-delay-passive = <100>;
- polling-delay = <0>;
+&thermal_zones {
+ pm8010-m-thermal {
+ polling-delay-passive = <100>;
+ polling-delay = <0>;

- thermal-sensors = <&pm8010_m_temp_alarm>;
+ thermal-sensors = <&pm8010_m_temp_alarm>;

- trips {
- trip0 {
- temperature = <95000>;
- hysteresis = <0>;
- type = "passive";
- };
+ trips {
+ trip0 {
+ temperature = <95000>;
+ hysteresis = <0>;
+ type = "passive";
+ };

- trip1 {
- temperature = <115000>;
- hysteresis = <0>;
- type = "hot";
- };
+ trip1 {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "hot";
};
};
+ };

- pm8010-n-thermal {
- polling-delay-passive = <100>;
- polling-delay = <0>;
+ pm8010-n-thermal {
+ polling-delay-passive = <100>;
+ polling-delay = <0>;

- thermal-sensors = <&pm8010_n_temp_alarm>;
+ thermal-sensors = <&pm8010_n_temp_alarm>;

- trips {
- trip0 {
- temperature = <95000>;
- hysteresis = <0>;
- type = "passive";
- };
+ trips {
+ trip0 {
+ temperature = <95000>;
+ hysteresis = <0>;
+ type = "passive";
+ };

- trip1 {
- temperature = <115000>;
- hysteresis = <0>;
- type = "hot";
- };
+ trip1 {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "hot";
};
};
};
diff --git a/arch/arm64/boot/dts/qcom/pm8550.dtsi b/arch/arm64/boot/dts/qcom/pm8550.dtsi
index 797a18c249a4..cb5e70b28445 100644
--- a/arch/arm64/boot/dts/qcom/pm8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8550.dtsi
@@ -6,26 +6,24 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>

-/ {
- thermal-zones {
- pm8550-thermal {
- polling-delay-passive = <100>;
- polling-delay = <0>;
+&thermal_zones {
+ pm8550-thermal {
+ polling-delay-passive = <100>;
+ polling-delay = <0>;

- thermal-sensors = <&pm8550_temp_alarm>;
+ thermal-sensors = <&pm8550_temp_alarm>;

- trips {
- trip0 {
- temperature = <95000>;
- hysteresis = <0>;
- type = "passive";
- };
+ trips {
+ trip0 {
+ temperature = <95000>;
+ hysteresis = <0>;
+ type = "passive";
+ };

- trip1 {
- temperature = <115000>;
- hysteresis = <0>;
- type = "hot";
- };
+ trip1 {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "hot";
};
};
};
diff --git a/arch/arm64/boot/dts/qcom/pm8550b.dtsi b/arch/arm64/boot/dts/qcom/pm8550b.dtsi
index 72609f31c890..b3cfa030679a 100644
--- a/arch/arm64/boot/dts/qcom/pm8550b.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8550b.dtsi
@@ -6,26 +6,24 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>

-/ {
- thermal-zones {
- pm8550b-thermal {
- polling-delay-passive = <100>;
- polling-delay = <0>;
-
- thermal-sensors = <&pm8550b_temp_alarm>;
-
- trips {
- trip0 {
- temperature = <95000>;
- hysteresis = <0>;
- type = "passive";
- };
+&thermal_zones {
+ pm8550b-thermal {
+ polling-delay-passive = <100>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&pm8550b_temp_alarm>;
+
+ trips {
+ trip0 {
+ temperature = <95000>;
+ hysteresis = <0>;
+ type = "passive";
+ };

- trip1 {
- temperature = <115000>;
- hysteresis = <0>;
- type = "hot";
- };
+ trip1 {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "hot";
};
};
};
diff --git a/arch/arm64/boot/dts/qcom/pm8550ve.dtsi b/arch/arm64/boot/dts/qcom/pm8550ve.dtsi
index 4dc1f03ab2c7..8ef57a51b5cd 100644
--- a/arch/arm64/boot/dts/qcom/pm8550ve.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8550ve.dtsi
@@ -6,26 +6,24 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>

-/ {
- thermal-zones {
- pm8550ve-thermal {
- polling-delay-passive = <100>;
- polling-delay = <0>;
-
- thermal-sensors = <&pm8550ve_temp_alarm>;
-
- trips {
- trip0 {
- temperature = <95000>;
- hysteresis = <0>;
- type = "passive";
- };
-
- trip1 {
- temperature = <115000>;
- hysteresis = <0>;
- type = "hot";
- };
+&thermal_zones {
+ pm8550ve-thermal {
+ polling-delay-passive = <100>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&pm8550ve_temp_alarm>;
+
+ trips {
+ trip0 {
+ temperature = <95000>;
+ hysteresis = <0>;
+ type = "passive";
+ };
+
+ trip1 {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "hot";
};
};
};
diff --git a/arch/arm64/boot/dts/qcom/pm8550vs.dtsi b/arch/arm64/boot/dts/qcom/pm8550vs.dtsi
index 97b1c18aa7d8..258526abcc21 100644
--- a/arch/arm64/boot/dts/qcom/pm8550vs.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8550vs.dtsi
@@ -6,89 +6,87 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>

-/ {
- thermal-zones {
- pm8550vs-c-thermal {
- polling-delay-passive = <100>;
- polling-delay = <0>;
-
- thermal-sensors = <&pm8550vs_c_temp_alarm>;
-
- trips {
- trip0 {
- temperature = <95000>;
- hysteresis = <0>;
- type = "passive";
- };
-
- trip1 {
- temperature = <115000>;
- hysteresis = <0>;
- type = "hot";
- };
+&thermal_zones {
+ pm8550vs-c-thermal {
+ polling-delay-passive = <100>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&pm8550vs_c_temp_alarm>;
+
+ trips {
+ trip0 {
+ temperature = <95000>;
+ hysteresis = <0>;
+ type = "passive";
+ };
+
+ trip1 {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "hot";
};
};
+ };

- pm8550vs-d-thermal {
- polling-delay-passive = <100>;
- polling-delay = <0>;
+ pm8550vs-d-thermal {
+ polling-delay-passive = <100>;
+ polling-delay = <0>;

- thermal-sensors = <&pm8550vs_d_temp_alarm>;
+ thermal-sensors = <&pm8550vs_d_temp_alarm>;

- trips {
- trip0 {
- temperature = <95000>;
- hysteresis = <0>;
- type = "passive";
- };
+ trips {
+ trip0 {
+ temperature = <95000>;
+ hysteresis = <0>;
+ type = "passive";
+ };

- trip1 {
- temperature = <115000>;
- hysteresis = <0>;
- type = "hot";
- };
+ trip1 {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "hot";
};
};
+ };

- pm8550vs-e-thermal {
- polling-delay-passive = <100>;
- polling-delay = <0>;
+ pm8550vs-e-thermal {
+ polling-delay-passive = <100>;
+ polling-delay = <0>;

- thermal-sensors = <&pm8550vs_e_temp_alarm>;
+ thermal-sensors = <&pm8550vs_e_temp_alarm>;

- trips {
- trip0 {
- temperature = <95000>;
- hysteresis = <0>;
- type = "passive";
- };
+ trips {
+ trip0 {
+ temperature = <95000>;
+ hysteresis = <0>;
+ type = "passive";
+ };

- trip1 {
- temperature = <115000>;
- hysteresis = <0>;
- type = "hot";
- };
+ trip1 {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "hot";
};
};
+ };

- pm8550vs-g-thermal {
- polling-delay-passive = <100>;
- polling-delay = <0>;
+ pm8550vs-g-thermal {
+ polling-delay-passive = <100>;
+ polling-delay = <0>;

- thermal-sensors = <&pm8550vs_g_temp_alarm>;
+ thermal-sensors = <&pm8550vs_g_temp_alarm>;

- trips {
- trip0 {
- temperature = <95000>;
- hysteresis = <0>;
- type = "passive";
- };
+ trips {
+ trip0 {
+ temperature = <95000>;
+ hysteresis = <0>;
+ type = "passive";
+ };

- trip1 {
- temperature = <115000>;
- hysteresis = <0>;
- type = "hot";
- };
+ trip1 {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "hot";
};
};
};
diff --git a/arch/arm64/boot/dts/qcom/pmr735d_a.dtsi b/arch/arm64/boot/dts/qcom/pmr735d_a.dtsi
index 37daaefe3431..251a16424d84 100644
--- a/arch/arm64/boot/dts/qcom/pmr735d_a.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmr735d_a.dtsi
@@ -6,26 +6,24 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>

-/ {
- thermal-zones {
- pmr735d-k-thermal {
- polling-delay-passive = <100>;
- polling-delay = <0>;
-
- thermal-sensors = <&pmr735d_k_temp_alarm>;
-
- trips {
- trip0 {
- temperature = <95000>;
- hysteresis = <0>;
- type = "passive";
- };
-
- trip1 {
- temperature = <115000>;
- hysteresis = <0>;
- type = "hot";
- };
+&thermal_zones {
+ pmr735d-k-thermal {
+ polling-delay-passive = <100>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&pmr735d_k_temp_alarm>;
+
+ trips {
+ trip0 {
+ temperature = <95000>;
+ hysteresis = <0>;
+ type = "passive";
+ };
+
+ trip1 {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "hot";
};
};
};
diff --git a/arch/arm64/boot/dts/qcom/pmr735d_b.dtsi b/arch/arm64/boot/dts/qcom/pmr735d_b.dtsi
index 3b470f6ac46f..dbcfeb53d8ec 100644
--- a/arch/arm64/boot/dts/qcom/pmr735d_b.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmr735d_b.dtsi
@@ -6,26 +6,24 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>

-/ {
- thermal-zones {
- pmr735d-l-thermal {
- polling-delay-passive = <100>;
- polling-delay = <0>;
-
- thermal-sensors = <&pmr735d_l_temp_alarm>;
-
- trips {
- trip0 {
- temperature = <95000>;
- hysteresis = <0>;
- type = "passive";
- };
-
- trip1 {
- temperature = <115000>;
- hysteresis = <0>;
- type = "hot";
- };
+&thermal_zones {
+ pmr735d-l-thermal {
+ polling-delay-passive = <100>;
+ polling-delay = <0>;
+
+ thermal-sensors = <&pmr735d_l_temp_alarm>;
+
+ trips {
+ trip0 {
+ temperature = <95000>;
+ hysteresis = <0>;
+ type = "passive";
+ };
+
+ trip1 {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "hot";
};
};
};
diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
index ee1ba5a8c8fc..c68e08747b6f 100644
--- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
@@ -4452,7 +4452,7 @@ compute-cb@8 {
};
};

- thermal-zones {
+ thermal_zones: thermal-zones {
aoss0-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;
diff --git a/arch/arm64/boot/dts/qcom/sm8650.dtsi b/arch/arm64/boot/dts/qcom/sm8650.dtsi
index 2df77123a8c7..32198bf3cf7c 100644
--- a/arch/arm64/boot/dts/qcom/sm8650.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8650.dtsi
@@ -5030,7 +5030,7 @@ compute-cb@8 {
};
};

- thermal-zones {
+ thermal_zones: thermal-zones {
aoss0-thermal {
polling-delay-passive = <0>;
polling-delay = <0>;

--
2.34.1

Next message: Linux regression tracking (Thorsten Leemhuis): "Re: [PATCH] gpiolib: acpi: Move ACPI device NULL check to acpi_can_fallback_to_crs()"
Previous message: Elliot Berman: "[PATCH RFC v3 4/9] dt-bindings: arm: qcom: Update Devicetree identifiers"
In reply to: Elliot Berman: "[PATCH RFC v3 4/9] dt-bindings: arm: qcom: Update Devicetree identifiers"
Next in thread: Dmitry Baryshkov: "Re: [PATCH RFC v3 0/9] dt-bindings: hwinfo: Introduce board-id"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]