[PATCH 1/5] dt-bindings: serial: 8250_omap: Add wakeup pinctrl state

[Markus Schneider-Pargmann]

Pins associated with the 8250 omap unit can be the source of a wakeup in
deep sleep states. To be able to wakeup, these pins have to be
configured in a special way. To support this configuration add the
default and wakeup pinctrl states.

Signed-off-by: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
---
 .../devicetree/bindings/serial/8250_omap.yaml    | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/Documentation/devicetree/bindings/serial/8250_omap.yaml b/Documentation/devicetree/bindings/serial/8250_omap.yaml
index 6a7be42da523..402e2ca81017 100644
--- a/Documentation/devicetree/bindings/serial/8250_omap.yaml
+++ b/Documentation/devicetree/bindings/serial/8250_omap.yaml
@@ -77,6 +77,22 @@ properties:
   current-speed: true
   overrun-throttle-ms: true
 
+  pinctrl-0:
+    description: Default pinctrl state
+
+  pinctrl-1:
+    description: Wakeup pinctrl state
+
+  pinctrl-names:
+    description:
+      When present should contain at least "default" describing the default pin
+      states. The second state called "wakeup" describes the pins in their
+      wakeup configuration required to exit sleep states.
+    minItems: 1
+    items:
+      - const: default
+      - const: wakeup
+
 required:
   - compatible
   - reg
-- 
2.43.0