Re: [PATCH v2 4/5] dt-bindings: iio: dac: Add adi,ltc2672.yaml

[Rob Herring]

On Thu, May 23, 2024 at 11:19:08AM +0800, Kim Seer Paller wrote:
> Add documentation for ltc2672.
> 
> Co-developed-by: Michael Hennerich <michael.hennerich@xxxxxxxxxx>
> Signed-off-by: Michael Hennerich <michael.hennerich@xxxxxxxxxx>
> Signed-off-by: Kim Seer Paller <kimseer.paller@xxxxxxxxxx>
> ---
>  .../bindings/iio/dac/adi,ltc2672.yaml         | 159 ++++++++++++++++++
>  MAINTAINERS                                   |   1 +
>  2 files changed, 160 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/dac/adi,ltc2672.yaml
> 
> diff --git a/Documentation/devicetree/bindings/iio/dac/adi,ltc2672.yaml b/Documentation/devicetree/bindings/iio/dac/adi,ltc2672.yaml
> new file mode 100644
> index 000000000000..996aae315640
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/dac/adi,ltc2672.yaml
> @@ -0,0 +1,159 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/dac/adi,ltc2672.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Analog Devices LTC2672 DAC
> +
> +maintainers:
> +  - Michael Hennerich <michael.hennerich@xxxxxxxxxx>
> +  - Kim Seer Paller <kimseer.paller@xxxxxxxxxx>
> +
> +description: |
> +  Analog Devices LTC2672 5 channel, 16 bit, 300mA DAC
> +  https://www.analog.com/media/en/technical-documentation/data-sheets/ltc2672.pdf
> +
> +properties:
> +  compatible:
> +    enum:
> +      - adi,ltc2672
> +
> +  reg:
> +    maxItems: 1
> +
> +  spi-max-frequency:
> +    maximum: 50000000
> +
> +  vcc-supply:
> +    description: Analog Supply Voltage Input.
> +
> +  v-neg-supply:
> +    description: Negative Supply Voltage Input.
> +
> +  vdd0-supply:
> +    description: Positive Supply Voltage Input for DAC OUT0.
> +
> +  vdd1-supply:
> +    description: Positive Supply Voltage Input for DAC OUT1.
> +
> +  vdd2-supply:
> +    description: Positive Supply Voltage Input for DAC OUT2.
> +
> +  vdd3-supply:
> +    description: Positive Supply Voltage Input for DAC OUT3.
> +
> +  vdd4-supply:
> +    description: Positive Supply Voltage Input for DAC OUT4.
> +
> +  iovcc-supply:
> +    description: Digital Input/Output Supply Voltage.
> +
> +  ref-supply:
> +    description:
> +      Reference Input/Output. The voltage at the REF pin sets the full-scale
> +      range of all channels. If not provided the internal reference is used and
> +      also provided on the VREF pin.
> +
> +  clr-gpios:
> +    description:
> +      Active Low Asynchronous Clear Input. A logic low at this level triggered
> +      input clears the device to the default reset code and output range, which
> +      is zero-scale with the outputs off. The control registers are cleared to
> +      zero.
> +    maxItems: 1
> +
> +  adi,rfsadj-ohms:
> +    description:
> +      If FSADJ is tied to VCC, an internal RFSADJ (20 kΩ) is selected, which
> +      results in nominal output ranges. When an external resistor of 19 kΩ to
> +      41 kΩ can be used instead by connecting the resistor between FSADJ and GND
> +      it controls the scaling of the ranges, and the internal resistor is
> +      automatically disconnected.
> +    minimum: 19000
> +    maximum: 41000
> +    default: 20000
> +
> +  io-channels:
> +    description:
> +      Analog multiplexer output. Pin voltages and currents can be monitored by
> +      measuring the voltage at MUX.

You need constraints for how many entries and what is each one.

> +
> +  '#address-cells':
> +    const: 1
> +
> +  '#size-cells':
> +    const: 0
> +
> +patternProperties:
> +  "^channel@[0-4]$":
> +    type: object
> +    additionalProperties: false
> +
> +    properties:
> +      reg:
> +        description: The channel number representing the DAC output channel.
> +        maximum: 4
> +
> +      adi,toggle-mode:
> +        description:
> +          Set the channel as a toggle enabled channel. Toggle operation enables
> +          fast switching of a DAC output between two different DAC codes without
> +          any SPI transaction.
> +        type: boolean
> +
> +      adi,output-range-microamp:
> +        description: Specify the channel output full scale range.
> +        $ref: /schemas/types.yaml#/definitions/uint32
> +        enum: [3125000, 6250000, 12500000, 25000000, 50000000, 100000000,
> +               200000000, 300000000]
> +
> +    required:
> +      - reg
> +      - adi,output-range-microamp
> +
> +required:
> +  - compatible
> +  - reg
> +  - spi-max-frequency
> +  - vcc-supply
> +  - iovcc-supply
> +  - v-neg-supply
> +
> +allOf:
> +  - $ref: /schemas/spi/spi-peripheral-props.yaml#
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    spi {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +        dac@0 {
> +            compatible = "adi,ltc2672";
> +            reg = <0>;
> +            spi-max-frequency = <10000000>;
> +
> +            vcc-supply = <&vcc>;
> +            iovcc-supply = <&vcc>;
> +            ref-supply = <&vref>;
> +            v-neg-supply = <&vneg>;
> +
> +            io-channels = <&adc 0>;
> +
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +            channel@0 {
> +                    reg = <0>;
> +                    adi,toggle-mode;
> +                    adi,output-range-microamp = <3125000>;
> +            };
> +
> +            channel@1 {
> +                    reg = <1>;
> +                    adi,output-range-microamp = <6250000>;
> +            };
> +        };
> +    };
> +...
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 7becbdf7d1df..3320b7af4c0b 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -12858,6 +12858,7 @@ S:	Supported
>  W:	https://ez.analog.com/linux-software-drivers
>  F:	Documentation/ABI/testing/sysfs-bus-iio-dac
>  F:	Documentation/devicetree/bindings/iio/dac/adi,ltc2664.yaml
> +F:	Documentation/devicetree/bindings/iio/dac/adi,ltc2672.yaml
>  
>  LTC2688 IIO DAC DRIVER
>  M:	Nuno Sá <nuno.sa@xxxxxxxxxx>
> -- 
> 2.34.1
>