Re: [PATCH] net: usb: smsc95xx: configure external LEDs function for EVB-LAN8670-USB

[Andrew Lunn]

On Thu, May 23, 2024 at 08:51:54AM +0000, Parthiban.Veerasooran@xxxxxxxxxxxxx wrote:
> Hi Andrew,
> 
> On 22/05/24 10:14 pm, Andrew Lunn wrote:
> > EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> > 
> > On Wed, May 22, 2024 at 07:38:17PM +0530, Parthiban Veerasooran wrote:
> >> By default, LAN9500A configures the external LEDs to the below function.
> >> nSPD_LED -> Speed Indicator
> >> nLNKA_LED -> Link and Activity Indicator
> >> nFDX_LED -> Full Duplex Link Indicator
> >>
> >> But, EVB-LAN8670-USB uses the below external LEDs function which can be
> >> enabled by writing 1 to the LED Select (LED_SEL) bit in the LAN9500A.
> >> nSPD_LED -> Speed Indicator
> >> nLNKA_LED -> Link Indicator
> >> nFDX_LED -> Activity Indicator
> > 
> > What else can the LEDs indicate?
> There is no other indications.

O.K. So it is probably not worth going the direction of using the
netde LED infrastructure to allow the use to configure the LED.

> >> +     /* Set LED Select (LED_SEL) bit for the external LED pins functionality
> >> +      * in the Microchip's EVB-LAN8670-USB 10BASE-T1S Ethernet device which
> > 
> > Is this a function of the USB dongle? Or a function of the PHY?
> It is the function of USB dongle.

So an OEM designing a dongle could make the LEDs do different things?

You are solving the problem only for your reference design, and OEMs
are going to have to solve the same problem for their own design?

This is why i'm asking is it a function of the PHY or the board. If it
is the PHY, we could have one generic solution for everybody using
that PHY.

	Andrew