[PATCH v3 5/8] hwmon: (k10temp) Define helper function to read CCD temp

From: Yazen Ghannam
Date: Thu May 23 2024 - 14:28:28 EST


The CCD temperature register is read in two places. These reads are done
using an AMD SMN access, and a number of parameters are needed for the
operation.

Move the SMN access and parameter gathering into a helper function in
order to simply the code flow. This also has a benefit of centralizing
the hardware register access in a single place in case fixes or special
decoding is required.

Signed-off-by: Yazen Ghannam <yazen.ghannam@xxxxxxx>
Reviewed-by: Mario Limonciello <mario.limonciello@xxxxxxx>
Acked-by: Guenter Roeck <linux@xxxxxxxxxxxx>
---
drivers/hwmon/k10temp.c | 14 +++++++++-----
1 file changed, 9 insertions(+), 5 deletions(-)

diff --git a/drivers/hwmon/k10temp.c b/drivers/hwmon/k10temp.c
index 6cad35e7f182..315c52de6e54 100644
--- a/drivers/hwmon/k10temp.c
+++ b/drivers/hwmon/k10temp.c
@@ -158,6 +158,13 @@ static void read_tempreg_nb_zen(struct pci_dev *pdev, u32 *regval)
*regval = 0;
}

+static int read_ccd_temp_reg(struct k10temp_data *data, int ccd, u32 *regval)
+{
+ u16 node_id = amd_pci_dev_to_node_id(data->pdev);
+
+ return amd_smn_read(node_id, ZEN_CCD_TEMP(data->ccd_offset, ccd), regval);
+}
+
static long get_raw_temp(struct k10temp_data *data)
{
u32 regval;
@@ -223,9 +230,7 @@ static int k10temp_read_temp(struct device *dev, u32 attr, int channel,
*val = 0;
break;
case 2 ... 13: /* Tccd{1-12} */
- ret = amd_smn_read(amd_pci_dev_to_node_id(data->pdev),
- ZEN_CCD_TEMP(data->ccd_offset, channel - 2),
- &regval);
+ ret = read_ccd_temp_reg(data, channel - 2, &regval);

if (ret)
return ret;
@@ -397,8 +402,7 @@ static void k10temp_get_ccd_support(struct pci_dev *pdev,
* the register value. And this will incorrectly pass the TEMP_VALID
* bit check.
*/
- if (amd_smn_read(amd_pci_dev_to_node_id(pdev),
- ZEN_CCD_TEMP(data->ccd_offset, i), &regval))
+ if (read_ccd_temp_reg(data, i, &regval))
continue;

if (regval & ZEN_CCD_TEMP_VALID)

--
2.34.1