Re: [PATCH 0/5] serial: 8250: omap: Add am62 wakeup support

[Francesco Dolcini]

Hello Markus,

On Thu, May 23, 2024 at 09:58:14AM +0200, Markus Schneider-Pargmann wrote:
> Hi,
> 
> to support wakeup from Partial-IO using serial pins of mcu_uart0 and
> wkup_uart0, this series adds a new pinctrl state 'wakeup' in which
> specific wakeup flags are set on these pins. Partial-IO is a poweroff
> state of the SoC in which only a few pingroups are partly powered.
> 
> If the user enabled wakeup from the serial port, the pinctrl state is
> selected on shutdown. For another deep sleep state, which is comparable
> with suspend to memory, the same pinctrl state is selected on suspend as
> well.
> 

..

> 
> After enabling Wake-on-LAN the system can be powered off and will enter
> the Partial-IO state in which it can be woken up by activity on the
> specific pins:
>     ethtool -s can0 wol p
>     ethtool -s can1 wol p
>     poweroff

Confused ... Why the CAN? This is about the UART.

Francesco