[PATCH v3 2/7] arm64: dts: ti: k3-j722s-main: Redefine USB1 node description
From: Siddharth Vadapalli
Date: Fri May 24 2024 - 05:07:19 EST
From: Ravi Gunasekaran <r-gunasekaran@xxxxxx>
USB1 controller on J722S and AM62P are from different vendors.
Redefine the USB1 node description for J722S by deleting the
node inherited from AM62P dtsi.
Signed-off-by: Ravi Gunasekaran <r-gunasekaran@xxxxxx>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@xxxxxx>
---
v2:
https://lore.kernel.org/r/20240513114443.16350-3-r-gunasekaran@xxxxxx/
No changes since v2.
v1:
https://lore.kernel.org/r/20240429120932.11456-3-r-gunasekaran@xxxxxx/
Changes since v1:
- The entire node which was added in k3-j722s.dtsi in v1 in now moved to
k3-j722s-main.dtsi as USB is a main domain peripheral.
- Used generic node names - renamed "cdns-usb@f920000" to "usb@f920000".
arch/arm64/boot/dts/ti/k3-j722s-main.dtsi | 39 +++++++++++++++++++++++
1 file changed, 39 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi b/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi
index 0dac8f1e1291..b069cecebfd9 100644
--- a/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi
@@ -6,6 +6,13 @@
#include <dt-bindings/phy/phy-ti.h>
+/*
+ * USB1 controller on AM62P and J722S are of different IP.
+ * Delete AM62P's USBSS1 node definition and redefine it for J722S.
+ */
+
+/delete-node/ &usbss1;
+
/ {
serdes_refclk: clk-0 {
compatible = "fixed-clock";
@@ -52,6 +59,38 @@ serdes0: serdes@f000000 {
status = "disabled"; /* Needs lane config */
};
};
+
+ usbss1: usb@f920000 {
+ compatible = "ti,j721e-usb";
+ reg = <0x00 0x0f920000 0x00 0x100>;
+ power-domains = <&k3_pds 278 TI_SCI_PD_EXCLUSIVE>;
+ clocks = <&k3_clks 278 3>, <&k3_clks 278 1>;
+ clock-names = "ref", "lpm";
+ assigned-clocks = <&k3_clks 278 3>; /* USB2_REFCLK */
+ assigned-clock-parents = <&k3_clks 278 4>; /* HF0SC0 */
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ status = "disabled";
+
+ usb1: usb@31200000{
+ compatible = "cdns,usb3";
+ reg = <0x00 0x31200000 0x00 0x10000>,
+ <0x00 0x31210000 0x00 0x10000>,
+ <0x00 0x31220000 0x00 0x10000>;
+ reg-names = "otg",
+ "xhci",
+ "dev";
+ interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */
+ <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>, /* irq.6 */
+ <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>; /* otgirq */
+ interrupt-names = "host",
+ "peripheral",
+ "otg";
+ maximum-speed = "super-speed";
+ dr_mode = "otg";
+ };
+ };
};
&main_conf {
--
2.40.1