RE: [EXT] Re: [PATCH v2 4/5] firmware: imx: add driver for NXP EdgeLock Enclave

[Pankaj Gupta]

> -----Original Message-----
> From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
> Sent: Friday, May 24, 2024 4:17 PM
> To: Pankaj Gupta <pankaj.gupta@xxxxxxx>
> Cc: Jonathan Corbet <corbet@xxxxxxx>; Rob Herring <robh+dt@xxxxxxxxxx>;
> Krzysztof Kozlowski <krzysztof.kozlowski+dt@xxxxxxxxxx>; Conor Dooley
> <conor+dt@xxxxxxxxxx>; Shawn Guo <shawnguo@xxxxxxxxxx>; Pengutronix
> Kernel Team <kernel@xxxxxxxxxxxxxx>; Fabio Estevam
> <festevam@xxxxxxxxx>; Rob Herring <robh@xxxxxxxxxx>; Krzysztof Kozlowski
> <krzk+dt@xxxxxxxxxx>; linux-doc@xxxxxxxxxxxxxxx; linux-
> kernel@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; imx@xxxxxxxxxxxxxxx;
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> Subject: [EXT] Re: [PATCH v2 4/5] firmware: imx: add driver for NXP EdgeLock
> Enclave
>
> Caution: This is an external email. Please take care when clicking links or
> opening attachments. When in doubt, report the message using the 'Report
> this email' button
>
>
> On Thu, May 23, 2024 at 04:19:35PM +0530, Pankaj Gupta wrote:
> > NXP hardware IP(s) for secure-enclaves like Edgelock Enclave(ELE), are
> > embedded in the SoC to support the features like HSM, SHE & V2X, using
> > message based communication interface.
> >
> > The secure enclave FW communicates on a dedicated messaging unit(MU)
> > based interface(s) with application core, where kernel is running.
> > It exists on specific i.MX processors. e.g. i.MX8ULP, i.MX93.
> >
> > This patch adds the driver for communication interface to
> > secure-enclave, for exchanging messages with NXP secure enclave HW
> > IP(s) like EdgeLock Enclave (ELE) from Kernel-space, used by kernel
> > management layers like
> > - DM-Crypt.
> >
> > Signed-off-by: Pankaj Gupta <pankaj.gupta@xxxxxxx>
> > ---
> >  drivers/firmware/imx/Kconfig        |  12 +
> >  drivers/firmware/imx/Makefile       |   2 +
> >  drivers/firmware/imx/ele_base_msg.c | 286 +++++++++++++++++++
> > drivers/firmware/imx/ele_base_msg.h |  92 +++++++
> >  drivers/firmware/imx/ele_common.c   | 239 ++++++++++++++++
> >  drivers/firmware/imx/ele_common.h   |  43 +++
> >  drivers/firmware/imx/se_ctrl.c      | 531
> ++++++++++++++++++++++++++++++++++++
> >  drivers/firmware/imx/se_ctrl.h      |  99 +++++++
> >  include/linux/firmware/imx/se_api.h |  14 +
> >  9 files changed, 1318 insertions(+)
> >
> > +static int imx_fetch_se_soc_info(struct device *dev) {
> > +     struct se_if_priv *priv = dev_get_drvdata(dev);
> > +     struct imx_se_node_info_list *info_list;
> > +     const struct imx_se_node_info *info;
> > +     struct soc_device_attribute *attr;
> > +     struct soc_device *sdev;
> > +     u64 serial_num;
> > +     u16 soc_rev;
> > +     int err = 0;
> > +
> > +     info = priv->info;
> > +     info_list = (struct imx_se_node_info_list *)
> > +                             device_get_match_data(dev);
> > +
> > +     /* This function should be called once.
> > +      * Check if the soc_rev is zero to continue.
> > +      */
> > +     if (priv->soc_rev)
> > +             return err;
> > +
> > +     err = info->se_fetch_soc_info(dev, &soc_rev, &serial_num);
> > +     if (err < 0) {
> > +             dev_err(dev, "Failed to fetch SoC Info.");
> > +             return err;
> > +     }
>
> This is called unconditionally but is not set for i.MX93. You should either set it
> for i.MX93 or check it before calling it.
>


Accepted. Will correct in v3.

> Sascha
>
> --
> Pengutronix e.K.                           |                             |
> Steuerwalder Str. 21                       |
> http://www.pe/
> ngutronix.de%2F&data=05%7C02%7Cpankaj.gupta%40nxp.com%7C104138b
> e4be445f8222608dc7bdee29f%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C
> 0%7C0%7C638521444411216377%7CUnknown%7CTWFpbGZsb3d8eyJWIjoi
> MC4wLjAwMDAiLCJQIjoiV2luMzIiLCJBTiI6Ik1haWwiLCJXVCI6Mn0%3D%7C0%
> 7C%7C%7C&sdata=MgDkY1PHo0qrLpw2IBCxVf4NVy3C3OInhb%2ByoUwib%2
> Bc%3D&reserved=0  |
> 31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |