Re: [PATCH v2 0/4] ASoC: qcom: display port changes

[Srinivas Kandagatla]

Hi Xilin,

On 23/05/2024 05:09, Xilin Wu wrote:
> > Srinivas Kandagatla (4):
> >    ASoC: qcom: q6dsp: parse Display port tokens
> >    ASoC: qcom: common: add Display port Jack function
> >    ASoC: qcom: sc8280xp: add Display port Jack
> >    ASoC: qcom: sm8250: fix a typo in function name
> >
> >   sound/soc/qcom/common.c         | 29 +++++++++++++++++++++++++++++
> >   sound/soc/qcom/common.h         |  3 +++
> >   sound/soc/qcom/qdsp6/topology.c | 26 ++++++++++++++++++++++++++
> >   sound/soc/qcom/sc8280xp.c       | 14 ++++++++++++++
> >   sound/soc/qcom/sm8250.c         |  4 ++--
> >   5 files changed, 74 insertions(+), 2 deletions(-)
>
> Hi Srini,
>
> I tested this series on SM8550 with tplg in [1] and ucm in [2]. But the 
> kernel output errors attached below. Headphone does work properly 
> without DisplayPort in the ucm.
>
> What could be the possible cause of this? Is there any significant 
> change from sc8280xp to sm8550?
>
> --
> Thanks,
> Xilin Wu
>
> [1] 
> https://github.com/edk2-porting/audioreach-topology/blob/sakuramist/QCS8550-AYN-ODIN2.m4
> [2] 
> https://github.com/strongtz/alsa-ucm-conf/blob/odin2/ucm2/Qualcomm/sm8550/HiFi.conf
>
> [ 1552.313713] qcom-apm gprsvc:service:2:1: Error (1) Processing 
> 0x01001000 cmd
> [ 1552.313730] qcom-apm gprsvc:service:2:1: DSP returned error[1001000] 1
> [ 1552.314455] qcom-apm gprsvc:service:2:1: Error (1) Processing 

Is the DP cable connected?

if its not connected the dsp will throw this error.

due to this issue I did workaround this issue by modeling it as 
conflicting device to Speaker in x13s ucm.

I see in your ucm setup its not the case.
which is why you might be hitting this issue.

Can you try
amixer -c 0 cset iface=MIXER,name='DISPLAY_PORT_RX_0 Audio Mixer 
MultiMedia2' 1
aplay -D plughw:0,1 some-wav-file.wav

both with and without display connected.


--srini



> 0x01001006 cmd
> [ 1552.314463] qcom-apm gprsvc:service:2:1: DSP returned error[1001006] 1
> [ 1552.315496] qcom-apm gprsvc:service:2:1: Error (1) Processing 
> 0x01001006 cmd
> [ 1552.315506] qcom-apm gprsvc:service:2:1: DSP returned error[1001006] 1
> [ 1552.316033] qcom-apm gprsvc:service:2:1: Error (1) Processing 
> 0x01001001 cmd
> [ 1552.316042] qcom-apm gprsvc:service:2:1: DSP returned error[1001001] 1
> [ 1552.316045] q6apm-lpass-dais 
> 30000000.remoteproc:glink-edge:gpr:service@1:bedais: Failed to prepare 
> Graph -22
> [ 1552.316047] q6apm-lpass-dais 
> 30000000.remoteproc:glink-edge:gpr:service@1:bedais: ASoC: error at 
> snd_soc_pcm_dai_prepare on DISPLAY_PORT_RX_0: -22