Re: [PATCH v4 1/5] drm/msm/dpu: fix video mode DSC for DSI
From: Dmitry Baryshkov
Date: Fri May 24 2024 - 16:00:07 EST
On Fri, May 24, 2024 at 09:18:21PM +0800, Jun Nie wrote:
> From: Jonathan Marek <jonathan@xxxxxxxx>
>
> Add necessary DPU timing and control changes for DSC to work with DSI
> video mode.
>
> Signed-off-by: Jonathan Marek <jonathan@xxxxxxxx>
> Signed-off-by: Jun Nie <jun.nie@xxxxxxxxxx>
> ---
> drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 2 +-
> drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h | 8 ++++++++
> drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c | 13 +++++++++++++
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c | 4 ++++
> 4 files changed, 26 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> index 119f3ea50a7c..48cef6e79c70 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c
> @@ -564,7 +564,7 @@ bool dpu_encoder_use_dsc_merge(struct drm_encoder *drm_enc)
> return (num_dsc > 0) && (num_dsc > intf_count);
> }
>
> -static struct drm_dsc_config *dpu_encoder_get_dsc_config(struct drm_encoder *drm_enc)
> +struct drm_dsc_config *dpu_encoder_get_dsc_config(struct drm_encoder *drm_enc)
> {
> struct msm_drm_private *priv = drm_enc->dev->dev_private;
> struct dpu_encoder_virt *dpu_enc = to_dpu_encoder_virt(drm_enc);
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
> index 002e89cc1705..2167c46c1a45 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys.h
> @@ -334,6 +334,14 @@ static inline enum dpu_3d_blend_mode dpu_encoder_helper_get_3d_blend_mode(
> */
> unsigned int dpu_encoder_helper_get_dsc(struct dpu_encoder_phys *phys_enc);
>
> +/**
> + * dpu_encoder_get_dsc_config - get DSC config for the DPU encoder
> + * This helper function is used by physical encoder to get DSC config
> + * used for this encoder.
> + * @drm_enc: Pointer to encoder structure
> + */
> +struct drm_dsc_config *dpu_encoder_get_dsc_config(struct drm_encoder *drm_enc);
> +
> /**
> * dpu_encoder_get_drm_fmt - return DRM fourcc format
> * @phys_enc: Pointer to physical encoder structure
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
> index ef69c2f408c3..7047b607ca91 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
> @@ -115,6 +115,19 @@ static void drm_mode_to_intf_timing_params(
> timing->h_front_porch = timing->h_front_porch >> 1;
> timing->hsync_pulse_width = timing->hsync_pulse_width >> 1;
> }
> +
> + /*
> + * for DSI, if compression is enabled, then divide the horizonal active
> + * timing parameters by compression ratio. bits of 3 components(R/G/B)
> + * is compressed into bits of 1 pixel.
> + */
> + if (phys_enc->hw_intf->cap->type != INTF_DP && timing->compression_en) {
> + struct drm_dsc_config *dsc =
> + dpu_encoder_get_dsc_config(phys_enc->parent);
> + timing->width = timing->width * (dsc->bits_per_pixel >> 4) /
Here you are truncating fractional part of BPP. Please use
drm_dsc_get_bpp_int(), at least it will warn if there is a fractional
part. Or, even better, add a helper to calculate width * bpp / 64 / (bpc
* 3) and use it here and in dsi_adjust_pclk_for_compression()
> + (dsc->bits_per_component * 3);
> + timing->xres = timing->width;
> + }
> }
>
> static u32 get_horizontal_total(const struct dpu_hw_intf_timing_params *timing)
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
> index 225c1c7768ff..2cf1f8c116b5 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_intf.c
> @@ -168,6 +168,10 @@ static void dpu_hw_intf_setup_timing_engine(struct dpu_hw_intf *intf,
>
> data_width = p->width;
>
> + /* TODO: handle DSC+DP case, we only handle DSC+DSI case so far */
> + if (p->compression_en && !dp_intf)
> + intf_cfg2 |= INTF_CFG2_DCE_DATA_COMPRESS;
> +
Separate commit, please
> hsync_data_start_x = hsync_start_x;
> hsync_data_end_x = hsync_start_x + data_width - 1;
>
>
> --
> 2.34.1
>
--
With best wishes
Dmitry