[PATCH v6 08/10] drm/bridge: tfp410: Use fwnode APIs to acquire device properties

From: Sui Jingfeng
Date: Sun May 26 2024 - 16:23:34 EST


Make this driver less DT-dependent by calling the newly created helpers,
also switch to use fwnode APIs to acquire additional device properties.
No functional changes for DT-based systems.

Signed-off-by: Sui Jingfeng <sui.jingfeng@xxxxxxxxx>
---
drivers/gpu/drm/bridge/ti-tfp410.c | 39 +++++++++++++++---------------
1 file changed, 20 insertions(+), 19 deletions(-)

diff --git a/drivers/gpu/drm/bridge/ti-tfp410.c b/drivers/gpu/drm/bridge/ti-tfp410.c
index 04a341133488..a1fae5e9dafd 100644
--- a/drivers/gpu/drm/bridge/ti-tfp410.c
+++ b/drivers/gpu/drm/bridge/ti-tfp410.c
@@ -261,8 +261,9 @@ static const struct drm_bridge_timings tfp410_default_timings = {

static int tfp410_parse_timings(struct tfp410 *dvi, bool i2c)
{
+ struct fwnode_handle *fwnode = dev_fwnode(dvi->dev);
struct drm_bridge_timings *timings = &dvi->timings;
- struct device_node *ep;
+ struct fwnode_handle *ep;
u32 pclk_sample = 0;
u32 bus_width = 24;
u32 deskew = 0;
@@ -283,14 +284,14 @@ static int tfp410_parse_timings(struct tfp410 *dvi, bool i2c)
* and EDGE pins. They are specified in DT through endpoint properties
* and vendor-specific properties.
*/
- ep = of_graph_get_endpoint_by_regs(dvi->dev->of_node, 0, 0);
+ ep = fwnode_graph_get_endpoint_by_id(fwnode, 0, 0, 0);
if (!ep)
return -EINVAL;

/* Get the sampling edge from the endpoint. */
- of_property_read_u32(ep, "pclk-sample", &pclk_sample);
- of_property_read_u32(ep, "bus-width", &bus_width);
- of_node_put(ep);
+ fwnode_property_read_u32(ep, "pclk-sample", &pclk_sample);
+ fwnode_property_read_u32(ep, "bus-width", &bus_width);
+ fwnode_handle_put(ep);

timings->input_bus_flags = DRM_BUS_FLAG_DE_HIGH;

@@ -319,7 +320,7 @@ static int tfp410_parse_timings(struct tfp410 *dvi, bool i2c)
}

/* Get the setup and hold time from vendor-specific properties. */
- of_property_read_u32(dvi->dev->of_node, "ti,deskew", &deskew);
+ fwnode_property_read_u32(fwnode, "ti,deskew", &deskew);
if (deskew > 7)
return -EINVAL;

@@ -331,12 +332,12 @@ static int tfp410_parse_timings(struct tfp410 *dvi, bool i2c)

static int tfp410_init(struct device *dev, bool i2c)
{
- struct device_node *node;
+ struct fwnode_handle *fwnode = dev_fwnode(dev);
struct tfp410 *dvi;
int ret;

- if (!dev->of_node) {
- dev_err(dev, "device-tree data is missing\n");
+ if (!fwnode) {
+ dev_err(dev, "firmware data is missing\n");
return -ENXIO;
}

@@ -356,15 +357,15 @@ static int tfp410_init(struct device *dev, bool i2c)
return ret;

/* Get the next bridge, connected to port@1. */
- node = of_graph_get_remote_node(dev->of_node, 1, -1);
- if (!node)
- return -ENODEV;
-
- dvi->next_bridge = of_drm_find_bridge(node);
- of_node_put(node);
-
- if (!dvi->next_bridge)
+ dvi->next_bridge = drm_bridge_find_next_bridge_by_fwnode(fwnode, 1);
+ if (IS_ERR(dvi->next_bridge)) {
+ ret = PTR_ERR(dvi->next_bridge);
+ dev_err(dev, "Error in founding the next bridge: %d\n", ret);
+ return ret;
+ } else if (!dvi->next_bridge) {
+ dev_dbg(dev, "Next bridge not found, deferring probe\n");
return -EPROBE_DEFER;
+ }

/* Get the powerdown GPIO. */
dvi->powerdown = devm_gpiod_get_optional(dev, "powerdown",
@@ -416,10 +417,10 @@ static struct platform_driver tfp410_platform_driver = {
/* There is currently no i2c functionality. */
static int tfp410_i2c_probe(struct i2c_client *client)
{
+ struct fwnode_handle *fwnode = dev_fwnode(&client->dev);
int reg;

- if (!client->dev.of_node ||
- of_property_read_u32(client->dev.of_node, "reg", &reg)) {
+ if (!fwnode || fwnode_property_read_u32(fwnode, "reg", &reg)) {
dev_err(&client->dev,
"Can't get i2c reg property from device-tree\n");
return -ENXIO;
--
2.34.1