[PATCH 0/3] arm64: dts: qcom: x1e80100: Describe 3 USB Type-C connectors currently used

[Abel Vesa]

Both QCP and CRD boards using X Elite (x1e80100) make use of 3 USB
Type-C ports (USB1 SS0, SS1, and SS2). Describe the graph for the USB
part of each one of them for now. The DP port will come at a later stage
since there are some muxes/retimers involved, depending on the type of
board.

Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxx>
---
Abel Vesa (3):
      arm64: dts: qcom: x1e80100: Add ports nodes to USB1 SS[0-2] PHYs and controllers
      arm64: dts: qcom: x1e80100-crd: Add pmic-glink node with all 3 connectors
      arm64: dts: qcom: x1e80100-qcp: Add pmic-glink node with all 3 connectors

 arch/arm64/boot/dts/qcom/x1e80100-crd.dts | 143 ++++++++++++++++++++++++++++++
 arch/arm64/boot/dts/qcom/x1e80100-qcp.dts | 143 ++++++++++++++++++++++++++++++
 arch/arm64/boot/dts/qcom/x1e80100.dtsi    | 123 +++++++++++++++++++++++--
 3 files changed, 403 insertions(+), 6 deletions(-)
---
base-commit: 3689b0ef08b70e4e03b82ebd37730a03a672853a
change-id: 20231214-x1e80100-dts-pmic-glink-65e351579b8b

Best regards,
-- 
Abel Vesa <abel.vesa@xxxxxxxxxx>