Re: [PATCH v2 3/7] phy: qcom: qmp-combo: introduce QPHY_MODE

[Neil Armstrong]

On 27/05/2024 10:46, Dmitry Baryshkov wrote:
> On Mon, May 27, 2024 at 10:42:35AM +0200, Neil Armstrong wrote:
> > Introduce an enum for the QMP Combo PHY modes, use it in the
> > QMP commmon phy init function and default to COMBO mode.
> >
> > Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>
> > ---
> >   drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 41 +++++++++++++++++++++++++++----
> >   1 file changed, 36 insertions(+), 5 deletions(-)
> >
> > diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> > index 183cd9cd1884..788e4c05eaf2 100644
> > --- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> > +++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
> > @@ -61,6 +61,12 @@
> >   
> >   #define PHY_INIT_COMPLETE_TIMEOUT		10000
> >   
> > +enum qphy_mode {
> > +	QPHY_MODE_COMBO = 0,
> > +	QPHY_MODE_DP_ONLY,
> > +	QPHY_MODE_USB_ONLY,
> > +};
> > +
> >   /* set of registers with offsets different per-PHY */
> >   enum qphy_reg_layout {
> >   	/* PCS registers */
> > @@ -1503,6 +1509,7 @@ struct qmp_combo {
> >   
> >   	struct mutex phy_mutex;
> >   	int init_count;
> > +	enum qphy_mode init_mode;
> >   
> >   	struct phy *usb_phy;
> >   	enum phy_mode mode;
> > @@ -2589,12 +2596,33 @@ static int qmp_combo_com_init(struct qmp_combo *qmp, bool force)
> >   	if (qmp->orientation == TYPEC_ORIENTATION_REVERSE)
> >   		val |= SW_PORTSELECT_VAL;
> >   	writel(val, com + QPHY_V3_DP_COM_TYPEC_CTRL);
> > -	writel(USB3_MODE | DP_MODE, com + QPHY_V3_DP_COM_PHY_MODE_CTRL);
> >   
> > -	/* bring both QMP USB and QMP DP PHYs PCS block out of reset */
> > -	qphy_clrbits(com, QPHY_V3_DP_COM_RESET_OVRD_CTRL,
> > -			SW_DPPHY_RESET_MUX | SW_DPPHY_RESET |
> > -			SW_USB3PHY_RESET_MUX | SW_USB3PHY_RESET);
> > +	switch (qmp->init_mode) {
> > +	case QPHY_MODE_COMBO:
> > +		writel(USB3_MODE | DP_MODE, com + QPHY_V3_DP_COM_PHY_MODE_CTRL);
> > +
> > +		/* bring both QMP USB and QMP DP PHYs PCS block out of reset */
> > +		qphy_clrbits(com, QPHY_V3_DP_COM_RESET_OVRD_CTRL,
> > +				SW_DPPHY_RESET_MUX | SW_DPPHY_RESET |
> > +				SW_USB3PHY_RESET_MUX | SW_USB3PHY_RESET);
> > +		break;
> > +
> > +	case QPHY_MODE_DP_ONLY:
> > +		writel(DP_MODE, com + QPHY_V3_DP_COM_PHY_MODE_CTRL);
> > +
> > +		/* bring QMP DP PHY PCS block out of reset */
> > +		qphy_clrbits(com, QPHY_V3_DP_COM_RESET_OVRD_CTRL,
> > +				SW_DPPHY_RESET_MUX | SW_DPPHY_RESET);
> > +		break;
> > +
> > +	case QPHY_MODE_USB_ONLY:
> > +		writel(USB3_MODE, com + QPHY_V3_DP_COM_PHY_MODE_CTRL);
> > +
> > +		/* bring QMP USB PHY PCS block out of reset */
> > +		qphy_clrbits(com, QPHY_V3_DP_COM_RESET_OVRD_CTRL,
> > +				SW_USB3PHY_RESET_MUX | SW_USB3PHY_RESET);
> > +		break;
> > +	}
> >   
> >   	qphy_clrbits(com, QPHY_V3_DP_COM_SWI_CTRL, 0x03);
> >   	qphy_clrbits(com, QPHY_V3_DP_COM_SW_RESET, SW_RESET);
> > @@ -3603,6 +3631,9 @@ static int qmp_combo_probe(struct platform_device *pdev)
> >   	if (ret)
> >   		goto err_node_put;
> >   
> > +	/* Set PHY_MODE as combo by default */
> > +	qmp->init_mode = QPHY_MODE_COMBO;
> > +
>
> I see that COMBO mode is backwards compatible with existing code. But
> shouldn't the USB-only be a default mode?

No because it would break existing platforms without "mode-switch" in DT.

Neil

> >   	qmp->usb_phy = devm_phy_create(dev, usb_np, &qmp_combo_usb_phy_ops);
> >   	if (IS_ERR(qmp->usb_phy)) {
> >   		ret = PTR_ERR(qmp->usb_phy);
> >
> > --
> > 2.34.1