[PATCH 3/3] i2c: mux: gpio: Add support for the 'transition-delay-ms' property

From: Bastien Curutchet
Date: Mon May 27 2024 - 07:40:09 EST


Some hardware need some time to switch from a bus to another. This can
cause the first transfers following the selection of a bus to fail.
There is no way to configure this kind of waiting time in the driver.

Add support for the 'transition-delay-ms' device-tree property. When set,
the i2c_mux_gpio_select() applies a delay before returning, leaving
enough time to the hardware to switch to the new bus.

Signed-off-by: Bastien Curutchet <bastien.curutchet@xxxxxxxxxxx>
---
drivers/i2c/muxes/i2c-mux-gpio.c | 6 ++++++
include/linux/platform_data/i2c-mux-gpio.h | 2 ++
2 files changed, 8 insertions(+)

diff --git a/drivers/i2c/muxes/i2c-mux-gpio.c b/drivers/i2c/muxes/i2c-mux-gpio.c
index c61e9d9ea695..d2cbbaa09485 100644
--- a/drivers/i2c/muxes/i2c-mux-gpio.c
+++ b/drivers/i2c/muxes/i2c-mux-gpio.c
@@ -6,6 +6,7 @@
*/

#include <linux/bits.h>
+#include <linux/delay.h>
#include <linux/gpio/consumer.h>
#include <linux/gpio/driver.h>
#include <linux/i2c.h>
@@ -37,6 +38,9 @@ static int i2c_mux_gpio_select(struct i2c_mux_core *muxc, u32 chan)

i2c_mux_gpio_set(mux, chan);

+ if (mux->data.transition_delay)
+ mdelay(mux->data.transition_delay);
+
return 0;
}

@@ -116,6 +120,8 @@ static int i2c_mux_gpio_probe_fw(struct gpiomux *mux,
if (device_property_read_u32(dev, "idle-state", &mux->data.idle))
mux->data.idle = I2C_MUX_GPIO_NO_IDLE;

+ device_property_read_u32(dev, "transition-delay-ms", &mux->data.transition_delay);
+
return 0;
}

diff --git a/include/linux/platform_data/i2c-mux-gpio.h b/include/linux/platform_data/i2c-mux-gpio.h
index 816a4cd3ccb5..c449f714d32b 100644
--- a/include/linux/platform_data/i2c-mux-gpio.h
+++ b/include/linux/platform_data/i2c-mux-gpio.h
@@ -19,6 +19,7 @@
* position
* @n_values: Number of multiplexer positions (busses to instantiate)
* @idle: Bitmask to write to MUX when idle or GPIO_I2CMUX_NO_IDLE if not used
+ * @transition_delay: Delay to wait when a new bus is selected
*/
struct i2c_mux_gpio_platform_data {
int parent;
@@ -26,6 +27,7 @@ struct i2c_mux_gpio_platform_data {
const unsigned *values;
int n_values;
unsigned idle;
+ int transition_delay;
};

#endif /* _LINUX_I2C_MUX_GPIO_H */
--
2.44.0