[PATCH 1/1] leds: ss4200: Convert PCIBIOS_* return codes to errnos

[Ilpo Järvinen]

ich7_lpc_probe() uses pci_read_config_dword() that returns PCIBIOS_*
codes. The error handling code assumes incorrectly it's a normal errno
and checks for < 0. The return code is returned from the probe function
as is but probe functions should return normal errnos.

Remove < 0 from the check and convert PCIBIOS_* returns code using
pcibios_err_to_errno() into normal errno before returning it.

Fixes: a328e95b82c1 ("leds: LED driver for Intel NAS SS4200 series (v5)")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
---
 drivers/leds/leds-ss4200.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/leds/leds-ss4200.c b/drivers/leds/leds-ss4200.c
index fcaa34706b6c..2ef9fc7371bd 100644
--- a/drivers/leds/leds-ss4200.c
+++ b/drivers/leds/leds-ss4200.c
@@ -356,8 +356,10 @@ static int ich7_lpc_probe(struct pci_dev *dev,
 
 	nas_gpio_pci_dev = dev;
 	status = pci_read_config_dword(dev, PMBASE, &g_pm_io_base);
-	if (status)
+	if (status) {
+		status = pcibios_err_to_errno(status);
 		goto out;
+	}
 	g_pm_io_base &= 0x00000ff80;
 
 	status = pci_read_config_dword(dev, GPIO_CTRL, &gc);
@@ -369,8 +371,9 @@ static int ich7_lpc_probe(struct pci_dev *dev,
 	}
 
 	status = pci_read_config_dword(dev, GPIO_BASE, &nas_gpio_io_base);
-	if (0 > status) {
+	if (status) {
 		dev_info(&dev->dev, "Unable to read GPIOBASE.\n");
+		status = pcibios_err_to_errno(status);
 		goto out;
 	}
 	dev_dbg(&dev->dev, ": GPIOBASE = 0x%08x\n", nas_gpio_io_base);
-- 
2.39.2