Re: [PATCH v1 1/2] dt-bindings: iio: adc: add ti,ads1119

[Conor Dooley]

On Mon, May 27, 2024 at 05:40:49PM +0200, Francesco Dolcini wrote:
> From: João Paulo Gonçalves <joao.goncalves@xxxxxxxxxxx>
> 
> Add devicetree bindings for Texas Instruments ADS1119 16-bit ADC
> with I2C interface.
> 
> Datasheet: https://www.ti.com/lit/gpn/ads1119
> Signed-off-by: João Paulo Gonçalves <joao.goncalves@xxxxxxxxxxx>
> Signed-off-by: Francesco Dolcini <francesco.dolcini@xxxxxxxxxxx>
> ---
>  .../bindings/iio/adc/ti,ads1119.yaml          | 122 ++++++++++++++++++
>  MAINTAINERS                                   |   7 +
>  2 files changed, 129 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/adc/ti,ads1119.yaml
> 
> diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads1119.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads1119.yaml
> new file mode 100644
> index 000000000000..ab4f01199dbe
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/adc/ti,ads1119.yaml
> @@ -0,0 +1,122 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/adc/ti,ads1119.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Texas Instruments ADS1119 ADC
> +
> +maintainers:
> +  - João Paulo Gonçalves <jpaulo.silvagoncalves@xxxxxxxxx>
> +
> +description: |

Most of the |s you have in this file are not needed - you don't have any
formatting to preserve in all but the channels.

> +  The TI ADS1119 is a precision 16-bit ADC over I2C that offers single-ended and
> +  differential measurements using a multiplexed input. It features a programmable
> +  gain, a programmable sample rate, an internal oscillator and voltage reference,
> +  and a 50/60Hz rejection filter.
> +
> +properties:
> +  compatible:
> +    const: ti,ads1119
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  reset-gpios:
> +    maxItems: 1
> +
> +  vref-supply:
> +    description:
> +      ADC external reference voltage (VREF).
> +
> +  "#address-cells":
> +    const: 1
> +
> +  "#size-cells":
> +    const: 0
> +
> +  "#io-channel-cells":
> +    const: 1
> +
> +required:
> +  - compatible
> +  - reg
> +  - "#address-cells"
> +  - "#size-cells"
> +
> +patternProperties:
> +  "^channel@([0-6])$":
> +    $ref: adc.yaml
> +    type: object
> +    description: |
> +      ADC channels.
> +
> +    properties:
> +      reg:
> +        description: |
> +          0: Voltage over AIN0 and AIN1.
> +          1: Voltage over AIN2 and AIN3.
> +          2: Voltage over AIN1 and AIN2.
> +          3: Voltage over AIN0 and GND.
> +          4: Voltage over AIN1 and GND.
> +          5: Voltage over AIN2 and GND.
> +          6: Voltage over AIN3 and GND.

Take a look at diff-channels.

> +        items:
> +          - minimum: 0
> +            maximum: 6
> +
> +      ti,gain:

What makes this a property of the hardware?
Also, missing unit.

> +        $ref: /schemas/types.yaml#/definitions/uint32
> +        description: |
> +          PGA gain value.
> +        enum: [1, 4]
> +        default: 1
> +
> +      ti,datarate:

Ditto here, why's this a property of the hardware? Usually this gets set
from sysfs..

Thanks,
Conor.

> +        $ref: /schemas/types.yaml#/definitions/uint32
> +        description: |
> +          Data acquisition rate in samples per second.
> +        enum: [20, 90, 330, 1000]
> +        default: 20
> +
> +    required:
> +      - reg
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    #include <dt-bindings/gpio/gpio.h>
> +
> +    i2c {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        adc@40 {
> +            compatible = "ti,ads1119";
> +            reg = <0x40>;
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +            #io-channel-cells = <1>;
> +
> +            channel@0 {
> +                reg = <0>;
> +                ti,gain = <4>;
> +                ti,datarate = <330>;
> +            };
> +
> +            channel@4 {
> +                reg = <4>;
> +                ti,datarate = <1000>;
> +            };
> +
> +            channel@5 {
> +                reg = <5>;
> +                ti,gain = <4>;
> +            };
> +        };
> +    };
> diff --git a/MAINTAINERS b/MAINTAINERS
> index d6c90161c7bf..f1b2c4b815e2 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -22380,6 +22380,13 @@ M:	Robert Richter <rric@xxxxxxxxxx>
>  S:	Odd Fixes
>  F:	drivers/gpio/gpio-thunderx.c
>  
> +TI ADS1119 ADC DRIVER
> +M:	Francesco Dolcini <francesco@xxxxxxxxxx>
> +M:	João Paulo Gonçalves <jpaulo.silvagoncalves@xxxxxxxxx>
> +L:	linux-iio@xxxxxxxxxxxxxxx
> +S:	Maintained
> +F:	Documentation/devicetree/bindings/iio/adc/ti,ads1119.yaml
> +
>  TI ADS7924 ADC DRIVER
>  M:	Hugo Villeneuve <hvilleneuve@xxxxxxxxxxxx>
>  L:	linux-iio@xxxxxxxxxxxxxxx
> -- 
> 2.39.2
>

Attachment: signature.asc
Description: PGP signature