[PATCH v1 12/17] iio: chemical: bme680: Allocate IIO device before chip initialization

[Vasileios Amoiridis]

Move the IIO device allocation before the actual initialization
of the chip to be more consistent with most IIO drivers and also
to have the ability to use any driver specific data for the chip
initialization.

While at it, fix also a misaligned line.

Signed-off-by: Vasileios Amoiridis <vassilisamir@xxxxxxxxx>
---
 drivers/iio/chemical/bme680_core.c | 38 +++++++++++++++---------------
 1 file changed, 19 insertions(+), 19 deletions(-)

diff --git a/drivers/iio/chemical/bme680_core.c b/drivers/iio/chemical/bme680_core.c
index ed4cdb4d64af..a6f425076d36 100644
--- a/drivers/iio/chemical/bme680_core.c
+++ b/drivers/iio/chemical/bme680_core.c
@@ -820,25 +820,6 @@ int bme680_core_probe(struct device *dev, struct regmap *regmap,
 	unsigned int val;
 	int ret;
 
-	ret = regmap_write(regmap, BME680_REG_SOFT_RESET,
-			   BME680_CMD_SOFTRESET);
-	if (ret < 0) {
-		dev_err(dev, "Failed to reset chip\n");
-		return ret;
-	}
-
-	ret = regmap_read(regmap, BME680_REG_CHIP_ID, &val);
-	if (ret < 0) {
-		dev_err(dev, "Error reading chip ID\n");
-		return ret;
-	}
-
-	if (val != BME680_CHIP_ID_VAL) {
-		dev_err(dev, "Wrong chip ID, got %x expected %x\n",
-				val, BME680_CHIP_ID_VAL);
-		return -ENODEV;
-	}
-
 	indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
 	if (!indio_dev)
 		return -ENOMEM;
@@ -860,6 +841,25 @@ int bme680_core_probe(struct device *dev, struct regmap *regmap,
 	data->heater_temp = 320; /* degree Celsius */
 	data->heater_dur = 150;  /* milliseconds */
 
+	ret = regmap_write(regmap, BME680_REG_SOFT_RESET,
+			   BME680_CMD_SOFTRESET);
+	if (ret < 0) {
+		dev_err(dev, "Failed to reset chip\n");
+		return ret;
+	}
+
+	ret = regmap_read(regmap, BME680_REG_CHIP_ID, &val);
+	if (ret < 0) {
+		dev_err(dev, "Error reading chip ID\n");
+		return ret;
+	}
+
+	if (val != BME680_CHIP_ID_VAL) {
+		dev_err(dev, "Wrong chip ID, got %x expected %x\n",
+			val, BME680_CHIP_ID_VAL);
+		return -ENODEV;
+	}
+
 	ret = bme680_chip_config(data);
 	if (ret < 0) {
 		dev_err(dev, "failed to set chip_config data\n");
-- 
2.25.1