[PATCH 1/4] phy: ti: phy-da8xx-usb: Add runtime PM support

[Bastien Curutchet]

Runtime PM is not supported while USB PHY can be turned off from
register accesses.

Add runtime PM for the USB2.0 PHY. The PHY is entirely shut down to save
as much power as possible. This means that gadgets will not be discovered
once suspend state is entered, and suspend state can not be left without
an explicit user intervention (through sysfs). That's why runtime PM is
disabled by default.

Signed-off-by: Bastien Curutchet <bastien.curutchet@xxxxxxxxxxx>
---
 drivers/phy/ti/phy-da8xx-usb.c | 49 ++++++++++++++++++++++++++++++++++
 1 file changed, 49 insertions(+)

diff --git a/drivers/phy/ti/phy-da8xx-usb.c b/drivers/phy/ti/phy-da8xx-usb.c
index dc614aa09a5f..80bfe37cf846 100644
--- a/drivers/phy/ti/phy-da8xx-usb.c
+++ b/drivers/phy/ti/phy-da8xx-usb.c
@@ -15,11 +15,13 @@
 #include <linux/phy/phy.h>
 #include <linux/platform_data/phy-da8xx-usb.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/regmap.h>
 
 #define PHY_INIT_BITS	(CFGCHIP2_SESENDEN | CFGCHIP2_VBDTCTEN)
 
 struct da8xx_usb_phy {
+	struct device		*dev;
 	struct phy_provider	*phy_provider;
 	struct phy		*usb11_phy;
 	struct phy		*usb20_phy;
@@ -40,6 +42,12 @@ static int da8xx_usb11_phy_power_on(struct phy *phy)
 	regmap_write_bits(d_phy->regmap, CFGCHIP(2), CFGCHIP2_USB1SUSPENDM,
 			  CFGCHIP2_USB1SUSPENDM);
 
+	/*
+	 * USB1.1 can used USB2.0 output clock as reference clock so this is here to prevent USB2.0
+	 * from shutting PHY's power when USB1.1 might use it
+	 */
+	pm_runtime_get_sync(d_phy->dev);
+
 	return 0;
 }
 
@@ -50,6 +58,7 @@ static int da8xx_usb11_phy_power_off(struct phy *phy)
 	regmap_write_bits(d_phy->regmap, CFGCHIP(2), CFGCHIP2_USB1SUSPENDM, 0);
 
 	clk_disable_unprepare(d_phy->usb11_clk);
+	pm_runtime_put_sync(d_phy->dev);
 
 	return 0;
 }
@@ -119,6 +128,35 @@ static const struct phy_ops da8xx_usb20_phy_ops = {
 	.owner		= THIS_MODULE,
 };
 
+static int __maybe_unused da8xx_runtime_suspend(struct device *dev)
+{
+	struct da8xx_usb_phy *d_phy = dev_get_drvdata(dev);
+
+	dev_dbg(dev, "Suspending ...\n");
+
+	regmap_set_bits(d_phy->regmap, CFGCHIP(2), CFGCHIP2_PHYPWRDN | CFGCHIP2_OTGPWRDN);
+
+	return 0;
+}
+
+static int __maybe_unused da8xx_runtime_resume(struct device *dev)
+{
+	u32 mask = CFGCHIP2_RESET | CFGCHIP2_PHYPWRDN | CFGCHIP2_OTGPWRDN | CFGCHIP2_PHY_PLLON;
+	struct da8xx_usb_phy *d_phy = dev_get_drvdata(dev);
+	u32 pll_status;
+
+	regmap_update_bits(d_phy->regmap, CFGCHIP(2), mask, CFGCHIP2_PHY_PLLON);
+
+	dev_dbg(dev, "Resuming ...\n");
+
+	return regmap_read_poll_timeout(d_phy->regmap, CFGCHIP(2), pll_status,
+					pll_status & CFGCHIP2_PHYCLKGD, 1000, 500000);
+}
+
+static const struct dev_pm_ops da8xx_usb_phy_pm_ops = {
+	SET_RUNTIME_PM_OPS(da8xx_runtime_suspend, da8xx_runtime_resume, NULL)
+};
+
 static struct phy *da8xx_usb_phy_of_xlate(struct device *dev,
 					 const struct of_phandle_args *args)
 {
@@ -148,6 +186,8 @@ static int da8xx_usb_phy_probe(struct platform_device *pdev)
 	if (!d_phy)
 		return -ENOMEM;
 
+	d_phy->dev = dev;
+
 	if (pdata)
 		d_phy->regmap = pdata->cfgchip;
 	else
@@ -209,6 +249,14 @@ static int da8xx_usb_phy_probe(struct platform_device *pdev)
 	regmap_write_bits(d_phy->regmap, CFGCHIP(2),
 			  PHY_INIT_BITS, PHY_INIT_BITS);
 
+	pm_runtime_set_active(dev);
+	devm_pm_runtime_enable(dev);
+	/*
+	 * Prevent runtime pm from being ON by default. Users can enable
+	 * it using power/control in sysfs.
+	 */
+	pm_runtime_forbid(dev);
+
 	return 0;
 }
 
@@ -233,6 +281,7 @@ static struct platform_driver da8xx_usb_phy_driver = {
 	.remove_new = da8xx_usb_phy_remove,
 	.driver	= {
 		.name	= "da8xx-usb-phy",
+		.pm	= &da8xx_usb_phy_pm_ops,
 		.of_match_table = da8xx_usb_phy_ids,
 	},
 };
-- 
2.44.0