Re: [PATCH v3 1/7] arm64: dts: ti: k3-j722s-main: Add support for SERDES0

[Roger Quadros]

On 24/05/2024 12:05, Siddharth Vadapalli wrote:
> From: Ravi Gunasekaran <r-gunasekaran@xxxxxx>
> 
> AM62P's DT source files are reused for J722S inorder to

inorder/in order

> avoid duplication of nodes. But J722S has additional
> peripherals that are not present in AM62P.
> 
> Introduce a -main.dtsi to define such additional main
> domain peripherals and define the SERDES0 node.
> 
> Signed-off-by: Ravi Gunasekaran <r-gunasekaran@xxxxxx>
> Signed-off-by: Siddharth Vadapalli <s-vadapalli@xxxxxx>
> ---
> v2:
> https://lore.kernel.org/r/20240513114443.16350-2-r-gunasekaran@xxxxxx/
> Changes since v2:
> - Renamed serdes0_ln_ctrl to serdes_ln_ctrl to keep the format
>   consistent across SoCs where a single node is sufficient to
>   represent the Lane-Muxing for all instances of the Serdes.
> 
> v1:
> https://lore.kernel.org/r/20240429120932.11456-2-r-gunasekaran@xxxxxx/
> Changes since v1:
> - Newly introduced k3-j722s-main.dtsi to add main domain peripherals
>   that are additionally present in J722S.
> - Used generic node names - renamed "clock-cmnrefclk" to "clk-0",
>   "wiz@f000000" to "phy@f000000"
> 
>  arch/arm64/boot/dts/ti/k3-j722s-main.dtsi | 64 +++++++++++++++++++++++
>  1 file changed, 64 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/ti/k3-j722s-main.dtsi
> 
> diff --git a/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi b/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi
> new file mode 100644
> index 000000000000..0dac8f1e1291
> --- /dev/null
> +++ b/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi
> @@ -0,0 +1,64 @@
> +// SPDX-License-Identifier: GPL-2.0-only OR MIT
> +/*
> + * Device Tree file for the J722S main domain peripherals
> + * Copyright (C) 2023-2024 Texas Instruments Incorporated - https://www.ti.com/
> + */
> +
> +#include <dt-bindings/phy/phy-ti.h>
> +
> +/ {
> +	serdes_refclk: clk-0 {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <0>;
> +	};
> +};
> +
> +&cbass_main {
> +	serdes_wiz0: phy@f000000 {
> +		compatible = "ti,am64-wiz-10g";
> +		ranges = <0x0f000000 0x0 0x0f000000 0x00010000>;
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		power-domains = <&k3_pds 279 TI_SCI_PD_EXCLUSIVE>;
> +		clocks = <&k3_clks 279 0>, <&k3_clks 279 1>, <&serdes_refclk>;
> +		clock-names = "fck", "core_ref_clk", "ext_ref_clk";
> +		num-lanes = <1>;
> +		#reset-cells = <1>;
> +		#clock-cells = <1>;
> +
> +		assigned-clocks = <&k3_clks 279 1>;
> +		assigned-clock-parents = <&k3_clks 279 5>;
> +
> +		serdes0: serdes@f000000 {
> +			compatible = "ti,j721e-serdes-10g";
> +			reg = <0x0f000000 0x00010000>;
> +			reg-names = "torrent_phy";
> +			resets = <&serdes_wiz0 0>;
> +			reset-names = "torrent_reset";
> +			clocks = <&serdes_wiz0 TI_WIZ_PLL0_REFCLK>,
> +				 <&serdes_wiz0 TI_WIZ_PHY_EN_REFCLK>;
> +			clock-names = "refclk", "phy_en_refclk";
> +			assigned-clocks = <&serdes_wiz0 TI_WIZ_PLL0_REFCLK>,
> +					  <&serdes_wiz0 TI_WIZ_PLL1_REFCLK>,
> +					  <&serdes_wiz0 TI_WIZ_REFCLK_DIG>;
> +			assigned-clock-parents = <&k3_clks 279 1>,
> +						 <&k3_clks 279 1>,
> +						 <&k3_clks 279 1>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			#clock-cells = <1>;
> +
> +			status = "disabled"; /* Needs lane config */
> +		};
> +	};
> +};
> +
> +&main_conf {
> +	serdes_ln_ctrl: mux-controller@4080 {
> +		compatible = "reg-mux";
> +		reg = <0x4080 0x4>;
> +		#mux-control-cells = <1>;
> +		mux-reg-masks = <0x0 0x3>; /* SERDES0 lane0 select */
> +	};
> +};

-- 
cheers,
-roger