Re: [PATCH] regulator: rtq2208: remove unused rtq2208_regulator_ldo_ops

[Arnd Bergmann]

On Tue, May 28, 2024, at 14:25, Mark Brown wrote:
> On Tue, May 28, 2024 at 02:12:13PM +0200, Arnd Bergmann wrote:
>
>> I did not analyze the change to see if this is the only required change
>> or if there should still have been a reference instead. Please review
>> and confirm, or provide a different fix.
>
> Fairly sure there should be a reference in _init_regulator_desc().

This is how 38bcec0e7cbb ("regulator: rtq2208: Fix
LDO discharge register and add vsel setting")] changed
the lines:

@@ -427,14 +448,11 @@ static void rtq2208_init_regulator_desc(struct rtq2208_regulator_desc *rdesc, in
                rdesc->suspend_mode_mask = RTQ2208_BUCK_STRMODE_MASK;
        } else {
                /* init ldo desc */
-               desc->enable_reg = curr_info->base;
-               desc->ops = &rtq2208_regulator_ldo_ops;
-               desc->n_voltages = 1;
-               desc->active_discharge_reg = LDO_RG_SHIFT(curr_info->base, 2);
-
-               rtq2208_ldo_match[*ldo_idx].name = desc->name;
-               rtq2208_ldo_match[*ldo_idx].driver_data = rdesc;
-               rtq2208_ldo_match[(*ldo_idx)++].desc = desc;
+               desc->active_discharge_reg = RTQ2208_REG_LDO_DVS_CTRL;
+               desc->active_discharge_on = curr_info->dis_on;
+               desc->active_discharge_mask = curr_info->dis_mask;
+               desc->vsel_reg = RTQ2208_REG_LDO_DVS_CTRL;
+               desc->vsel_mask = curr_info->vsel_mask;
 
                rdesc->suspend_config_reg = curr_info->base;
                rdesc->suspend_enable_mask = RTQ2208_LDO_EN_STR_MASK;

If the desc->ops was removed by accident, it seems
likely that desc->n_voltages also needs to be reverted.

     Arnd