Re: [PATCH v3 3/7] arm64: dts: ti: k3-j722s-evm: Update USB0 and USB1

[Siddharth Vadapalli]

On Tue, May 28, 2024 at 03:18:25PM +0300, Roger Quadros wrote:

[...]

> > +	dr_mode = "host";
> > +	maximum-speed = "super-speed";
> > +	phys = <&serdes0_usb_link>;
> > +	phy-names = "cdns3,usb3-phy";
> > +};
> > diff --git a/arch/arm64/boot/dts/ti/k3-j722s.dtsi b/arch/arm64/boot/dts/ti/k3-j722s.dtsi
> > index c75744edb143..61b64fae1bf4 100644
> > --- a/arch/arm64/boot/dts/ti/k3-j722s.dtsi
> > +++ b/arch/arm64/boot/dts/ti/k3-j722s.dtsi
> > @@ -87,3 +87,8 @@ &oc_sram {
> >  	reg = <0x00 0x70000000 0x00 0x40000>;
> >  	ranges = <0x00 0x00 0x70000000 0x40000>;
> >  };
> > +
> > +/* Include bus peripherals that are additionally
> > + * present in J722S
> > + */
> > + #include "k3-j722s-main.dtsi"
> > diff --git a/arch/arm64/boot/dts/ti/k3-serdes.h b/arch/arm64/boot/dts/ti/k3-serdes.h
> 
> The k3-serdes.h changes should be in a separate independent patch.

Ok. Will create a new patch in v4 addressing your comments on patch 5 of
this series to combine Serdes1 changes as well into the same patch.

Regards,
Siddharth.