Re: [PATCH] arm64: dts: amlogic: ad402: move thermal-zones to top node

[Neil Armstrong]

On 28/05/2024 15:31, Arnd Bergmann wrote:
> From: Arnd Bergmann <arnd@xxxxxxxx>
>
> It appears that this accidentally got added into the spi node, causing
> a warning.
>
> arch/arm64/boot/dts/amlogic/meson-a1-ad402.dts:119.16-161.4: Warning (spi_bus_reg): /soc/spi@fd000400/thermal-zones: missing or empty reg property
>
> Fixes: 593ab951232b ("arm64: dts: amlogic: ad402: setup thermal-zones")
> Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx>
> ---
>   .../arm64/boot/dts/amlogic/meson-a1-ad402.dts | 62 +++++++++----------
>   1 file changed, 31 insertions(+), 31 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-a1-ad402.dts b/arch/arm64/boot/dts/amlogic/meson-a1-ad402.dts
> index c8579b6e67cf..6883471a93b4 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-a1-ad402.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-a1-ad402.dts
> @@ -84,37 +84,6 @@ vddio_1v8: regulator-vddio-1v8 {
>   		vin-supply = <&vddao_3v3>;
>   		regulator-always-on;
>   	};
> -};
> -
> -/* Bluetooth HCI H4 */
> -&uart_AO {
> -	status = "okay";
> -	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
> -	pinctrl-names = "default";
> -};
> -
> -&uart_AO_B {
> -	status = "okay";
> -};
> -
> -&saradc {
> -	status = "okay";
> -	vref-supply = <&vddio_1v8>;
> -};
> -
> -&spifc {
> -	status = "okay";
> -	pinctrl-0 = <&spifc_pins>;
> -	pinctrl-names = "default";
> -
> -	flash@0 {
> -		compatible = "spi-nand";
> -		status = "okay";
> -		reg = <0>;
> -		spi-max-frequency = <96000000>;
> -		spi-tx-bus-width = <4>;
> -		spi-rx-bus-width = <4>;
> -	};
>   
>   	thermal-zones {
>   		soc_thermal: soc_thermal {
> @@ -161,6 +130,37 @@ map1 {
>   	};
>   };
>   
> +/* Bluetooth HCI H4 */
> +&uart_AO {
> +	status = "okay";
> +	pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
> +	pinctrl-names = "default";
> +};
> +
> +&uart_AO_B {
> +	status = "okay";
> +};
> +
> +&saradc {
> +	status = "okay";
> +	vref-supply = <&vddio_1v8>;
> +};
> +
> +&spifc {
> +	status = "okay";
> +	pinctrl-0 = <&spifc_pins>;
> +	pinctrl-names = "default";
> +
> +	flash@0 {
> +		compatible = "spi-nand";
> +		status = "okay";
> +		reg = <0>;
> +		spi-max-frequency = <96000000>;
> +		spi-tx-bus-width = <4>;
> +		spi-rx-bus-width = <4>;
> +	};
> +};
> +
>   &usb2_phy1 {
>   	phy-supply = <&vcc_3v3>;
>   };

Oops thx for figuring that out


Acked-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>