[PATCH] dt-bindings: sound: tlv320adc3xxx: Fix incorrect GPIO description
From: Ricard Wanderlof
Date: Tue May 28 2024 - 11:40:35 EST
Fix the description for the ti,dmdin-gpio1 and ti,dmclk-gpio2
properties to correctly describe that when configured as general
purpose outputs (ADC3XXX_GPIO_GPO), the pins are available via
the GPIO framework.
Signed-off-by: Ricard Wanderlof <ricard.wanderlof@xxxxxxxx>
---
Documentation/devicetree/bindings/sound/ti,tlv320adc3xxx.yaml | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/sound/ti,tlv320adc3xxx.yaml b/Documentation/devicetree/bindings/sound/ti,tlv320adc3xxx.yaml
index ede14ca2c07a..8ac741f4cd56 100644
--- a/Documentation/devicetree/bindings/sound/ti,tlv320adc3xxx.yaml
+++ b/Documentation/devicetree/bindings/sound/ti,tlv320adc3xxx.yaml
@@ -58,8 +58,8 @@ properties:
description: |
Configuration for DMDIN/GPIO1 pin.
- When ADC3XXX_GPIO_GPO is configured, this causes corresponding the
- ALSA control "GPIOx Output" to appear, as a switch control.
+ When ADC3XXX_GPIO_GPO is selected, the pin may be controlled via the
+ GPIO framework, as pin number 0 on the device.
ti,dmclk-gpio2:
$ref: /schemas/types.yaml#/definitions/uint32
@@ -76,8 +76,8 @@ properties:
description: |
Configuration for DMCLK/GPIO2 pin.
- When ADC3XXX_GPIO_GPO is configured, this causes corresponding the
- ALSA control "GPIOx Output" to appear, as a switch control.
+ When ADC3XXX_GPIO_GPO is selected, the pin may be controlled via the
+ GPIO framework, as pin number 1 on the device.
Note that there is currently no support for reading the GPIO pins as
inputs.
---
base-commit: 47d09270d7776e46858a161f94b735640b2fb056
change-id: 20240528-tlv320adc3xxx-dt-gpio-fix-a3384e435148
Best regards,
--
--
Ricard Wolf Wanderlof ricardw(at)axis.com
Axis Communications AB, Lund, Sweden www.axis.com
Phone +46 46 272 2016 Fax +46 46 13 61 30